IDC Select 1-3/16"-ID QD SK-STYLE PT BUSHINGS IDC SK-1-3/16
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
-
BrandIDC Select®
-
UPC887412019789
-
Manufacturer Part NumberIDC SK-1-3/16
-
CountryUSA
-
MaterialNodular Graphite Cast Iron
-
Flange Diameter3-7/8 in
-
Flange Thickness9/16 in
-
Torque Rating10 ft-lb
-
TypeFinished Bore
-
Screw Size5/16-18 x 2 in
-
Barrel Diameter2.812 in
-
Keyway Size1/4 x 1/8 in
-
Bolt Circle Diameter3-5/16 in
-
Bore Diameter1-3/16 in
-
Overall Length1-15/16 in
- Easy installation and dismount
- Setscrew over keyway
- Most sizes can be reverse mounted
- Keystock provided with shallow key sizes
- SK size QD® bushing
-
UNSPSC31171605
-
Package Description1/PK
-
Standards/ApprovalsANSI Specified|ASTM A536/A536-84|SAE Standard
-
Technical Bulletin
-
Catalog
Recently Viewed
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
Browning® 3207974 Type SH Q-D® Bushing, 25 mm Dia Bore, 1.871 in Dia Barrel, 2-11/16 in Dia Flange, 1.2 in OAL, Ductile Iron
Browning® 3207974 Type SH Q-D® Bushing, 25 mm Dia Bore, 1.871 in Dia Barrel, 2-11/16 in Dia Flange, 1.2 in OAL, Ductile Iron
Browning® 1078096 QD Bushing, 2-5/8 in Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
3/4" -ID HIGH PILLOW BLOCK UNIT-FYHEBP20412 >
OIL SEALS-NAT13350>
