Browning 1-GRV A OR B-BELT H-BUSH SHEAVES BRW BK-65-4
Browning® Classical Gripbelt® 1042514 BK Series Type 2 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 6-1/4 in OD, 5.7 in (A)/6.2 in (B) Dia Pitch, 7/8 in W Face
-
BrandBrowning®
-
UPC662289112326
-
Manufacturer Part Number1042514
-
CountryUSA
-
Face Width7/8 in
-
Bushing TypeH
-
Pitch Diameter5.7 in (A)/6.2 in (B)
-
FinishGray Painted
-
MaterialCast Iron
-
TypeType 2
-
SeriesBK Series
-
Hub Projection15/32 in
-
Outside Diameter6-1/4 in
-
Bore Diameter3/8 to 1-1/2 in
-
Bore TypeSplit Taper
-
Overall Length1-1/2 in
-
Suitable For Use With4L/A and 5L/B Cross Section Belt
- Largest Selection of H Bushed sheaves of any other manufacturer - Browning offers bushed sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
- Combination Groove - All Browning BK H Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Tightened micro-finish on groove walls for increased belt life
- Split Taper® bushings are highest torque carrying capacity in the Browning® bushing product line
- Double split barrel assures true concentricity
- Largest Selection of H Bushed sheaves of any other manufacturer - Browning offers bushed sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Combination Groove - All Browning BK H Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Wrapped construction - Browning offers a full line of wrapped FHP Belts which provides smooth quiet operation
- Wrapped FHP Belts are more tolerant to slipping and misalignment than Raw Edge Belts
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100783591 |
| Motion Industries | 00728337 |
-
Alternative Part NumberBK65H
-
UNSPSC24101610
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® Classical Gripbelt® 1042514 BK Series Type 2 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 6-1/4 in OD, 5.7 in (A)/6.2 in (B) Dia Pitch, 7/8 in W Face
Browning® 3111861 Double Sided Type L Synchronous Belt, 80 Teeth, 3/8 in Pitch, 30 in OAL, 1/2 in W, Neoprene
Browning® 3549136 Type B Synchronous Belt, 80 Teeth, 8 mm Pitch, 640 mm OAL, 30 mm W, Neoprene
Dichtomatik 75102179 O-Ring, 257 Dash Number, 5.859 in ID x 6.137 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
RIDGID® 29848 VT1781 Multi Purpose Car Nozzle, For Use With: 16 Gallon Two Stage Wet/Dry Vacuum, 1-7/8 in
RIDGID® 29848 VT1781 Multi Purpose Car Nozzle, For Use With: 16 Gallon Two Stage Wet/Dry Vacuum, 1-7/8 in
PIP® UB-21-1000 UB-1000 Lightweight Disposable Bouffant Cap, 21 in, White, Spunbond Polypropylene
PIP® UB-21-1000 UB-1000 Lightweight Disposable Bouffant Cap, 21 in, White, Spunbond Polypropylene
