Browning® Gearbelt® 3513595 Solid Type EF Synchronous Timing Pulley With Flange, 1/2 to 2 in QD® Bore, 3.766 in OD, 24 Grooves, 3.82 in Dia Pitch, 1-5/16 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
-
BrandBrowning®
-
UPC662289347865
-
Manufacturer Part Number3513595
-
CountryUSA
-
Face Width1-5/16 in
-
Bushing TypeSDS
-
Pitch1/2 in
-
Pitch Diameter3.82 in
-
Flange Diameter4-1/16 in
-
TypeSolid Type EF
-
Number of Grooves24
-
Outside Diameter3.766 in
-
Bore Diameter1/2 to 2 in
-
Bore TypeQD®
-
Overall Length2.04375 in
-
Suitable For Use With1 in W Type H100 Belt
- Constant speed, no slip, no creep, minimum backlash, because of the positive grip of the belt teeth with pulley grooves
- High modulus strength member, needs minimum take-up
- Freedom from initial belt tension, reduces bearing loads, increases life
- Compact design Gearbelt® belts permit smaller pulleys, shorter centers and narrow belts
- Lightweight, high horsepower-to-weight ratio makes Gearbelt® drives ideal for any application where weight is an important factor
- Less heat, because Gearbelt® drives generate virtually no friction
- No lubrication required
- Wide load capacity range
- Wide belt speed range
-
Alternative Part Number24H100SDS
-
UNSPSC26111807
-
Package Description1/PK
-
Warranty1 Year
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Browning® Gearbelt® 3513595 Solid Type EF Synchronous Timing Pulley With Flange, 1/2 to 2 in QD® Bore, 3.766 in OD, 24 Grooves, 3.82 in Dia Pitch, 1-5/16 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Browning® Gearbelt® 1055136 Type 2 Synchronous Timing Pulley With Flange, 1/2 to 1-5/8 in Bore, 3.79 in OD, 32 Grooves, 3.82 in Dia Pitch, 3/4 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
Browning® Classical Gripbelt® 1042548 BK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 6.95 in OD, 6.4 in (A)/6.9 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1042548 BK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 6.95 in OD, 6.4 in (A)/6.9 in (B) Dia Pitch, 7/8 in W Face
1/4" HOSEX14-MM FEM. DIN 90 DEG.-MHDE0414FML90 >
United Abrasives-SAIT 57090 Close Coated General Purpose Abrasive Disc, 7 in Dia, 7/8 in Center Hole, 100 Grit, 2A Aluminum Oxide Abrasive
