Gates® Power Transmission Poly Chain® GT®2 8MX-112S-62 Synchronous Sprocket, 7/8 to 3-1/4 in Taper-Lock® Bore, 11.17 in OD, 112 Grooves, 11.229 in Dia Pitch, 2.91 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
-
BrandGates® Power Transmission
-
UPC72053460780
-
Manufacturer Part Number8MX-112S-62
-
CountryUSA|Canada
-
Face Width2.91 in
-
Bushing Type3020
-
Pitch8 mm
-
Pitch Diameter11.229 in
-
MaterialCast Iron
-
Series7718
-
Hub Diameter5.42 in
-
Number of Grooves112
-
Outside Diameter11.17 in
-
Bore Diameter7/8 to 3-1/4 in
-
Bore TypeTaper-Lock®
-
Suitable For Use With62 mm W Poly Chain® Belt
- Full split in bushing allows easy installation and removal
- Poly Chain® GT®2 sprockets keep overhung load below manufacturers recommendation
- Precise sprocket design produces positive, press fit to shaft
- Sprockets are precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77186112
-
UNSPSC31171900
-
Package DescriptionEACH
-
Full Engineering Drawing
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 8MX-112S-62 Synchronous Sprocket, 7/8 to 3-1/4 in Taper-Lock® Bore, 11.17 in OD, 112 Grooves, 11.229 in Dia Pitch, 2.91 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
INSSXV-115 Dodge® 130305 210 Intermediate Duty Collar Ball Bearing, 1-15/16 in Dia Bore, 3.5433 in OD, 1.72 in W, 7891 lb Dynamic/5213 lb Static Load
Dodge® 130305 210 Intermediate Duty Collar Ball Bearing, 1-15/16 in Dia Bore, 3.5433 in OD, 1.72 in W, 7891 lb Dynamic/5213 lb Static Load
Chicago Pneumatic CP-9429 Ratchet Wrench, 3/8 in Drive, 70 N-m Torque, 150 rpm Speed, 15 cfm Air Flow, 90 psi
The CP828 series pneumatic ratchet wrench is designed for general maintenance with its torque of 50 ft.lbs / 70 Nm. The CP828 Series is composed of 2 models: 3/8 Inch and 1/2 Inch anvil.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Browning® 3748738 Taper Lock Bushing, 11/16 in Dia Bore, 1-7/8 in Dia Barrel, 1-1/2 in OAL, Steel
Browning® 3748738 Taper Lock Bushing, 11/16 in Dia Bore, 1-7/8 in Dia Barrel, 1-1/2 in OAL, Steel
