Gates® Power Transmission Poly Chain® GT®2 14MX-71S-37 Synchronous Sprocket, 1-3/16 to 3-15/16 in Taper-Lock® Bore, 12.35 in OD, 71 Grooves, 12.457 in Dia Pitch, 2.06 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
-
BrandGates® Power Transmission
-
UPC72053272222
-
Manufacturer Part Number14MX-71S-37
-
CountryUSA|Canada
-
Face Width2.06 in
-
Bushing Type3525
-
Pitch14 mm
-
Pitch Diameter12.457 in
-
MaterialCast Iron
-
Flange Diameter13.07 in
-
Series7719
-
Hub Diameter8-3/4 in
-
Number of Grooves71
-
Outside Diameter12.35 in
-
Bore Diameter1-3/16 to 3-15/16 in
-
Bore TypeTaper-Lock®
-
Overall Length2-1/2 in
-
Suitable For Use With37 mm W Poly Chain® Belt
- Full split in bushing allows easy installation and removal
- Poly Chain® GT®2 sprockets keep overhung load below manufacturers recommendation
- Precise sprocket design produces positive, press fit to shaft
- Sprockets are precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77193071
-
UNSPSC31171900
-
Package DescriptionEACH
-
Catalog
-
Instruction/Installation Manual
-
Full Engineering Drawing
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 14MX-71S-37 Synchronous Sprocket, 1-3/16 to 3-15/16 in Taper-Lock® Bore, 12.35 in OD, 71 Grooves, 12.457 in Dia Pitch, 2.06 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Morse® 604103 Lock Washer, For Use With Model 350A Plain Bore Torque Limiter
Morse® 604103 Lock Washer, For Use With Model 350A Plain Bore Torque Limiter
Moldex® 2400N95 Disposable Particulate Respirator With Exhale Valve, M/L, Resists: Heat, Flame, Nuisance Organic Vapors and Non-Oil Based Particulates
IKO PILLOBALL POSB6LNF Inch Series Insert/Lubrication Type Rod End With Zerk Type Grease Nipple, 3/8 in Dia Bore, 1 in OD, 1/2 in W, 9230 N Dynamic/21600 N Static Load
PILLOBALL self-aligning Rod Ends can be used as link mechanisms in a variety of machines and are designed for easy installation.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
