Gates® Power Transmission Poly Chain® GT®2 14MX-29S-20 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 4.98 in OD, 29 Grooves, 5.088 in Dia Pitch, 1.36 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
-
BrandGates® Power Transmission
-
UPC72053271607
-
Manufacturer Part Number14MX-29S-20
-
CountryUSA|Canada
-
Face Width1.36 in
-
Bushing Type2012
-
Pitch14 mm
-
Pitch Diameter5.088 in
-
MaterialCast Iron
-
Flange Diameter5.76 in
-
Series7719
-
Hub Diameter3.99 in
-
Number of Grooves29
-
Outside Diameter4.98 in
-
Bore Diameter1/2 to 2-1/8 in
-
Bore TypeTaper-Lock®
-
Suitable For Use With20 mm W Poly Chain® Belt
- Full split in bushing allows easy installation and removal
- Poly Chain® GT®2 sprockets keep overhung load below manufacturers recommendation
- Precise sprocket design produces positive, press fit to shaft
- Sprockets are precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77192029
-
UNSPSC31171900
-
Package DescriptionEACH
-
Catalog
-
Instruction/Installation Manual
-
Full Engineering Drawing
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 14MX-29S-20 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 4.98 in OD, 29 Grooves, 5.088 in Dia Pitch, 1.36 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
40-B-25-F-7/8 25 Tooth Sprockets For #40
25 TOOTH SPROCKETS FOR #40 CHAIN-IDC40B25F7/8 >
Tigerflex® TG600X100 TG Standard Duty Suction Hose, Hose End Style, 100 ft L, 30 psi Working, EPDM Tube, Domestic
CRC SL3190 Sta-Plex™ Extreme Pressure Non-Flammable Premium Grease, 14 oz Cartridge, Semi-Solid to Solid Grease, Red, -20 to 325 deg F
From the CRC family of products comes another industry leading solution. Sta-Lube® Sta-Plex® Extreme Pressure Premium Red Grease is a multi-purpose, red lithium complex grease that withstands extreme pressures and temperature ranges. Formulated with anti-oxidation, anti-rust, and anti-wear additives, it is a highly versatile grease for use in both automotive and industrial settings.
Weiler® 09460 2-Section Wheel Brush, 10 in Dia Brush, 1-1/4 in W Face, 0.0118 in Dia Filament/Wire Standard/Twist Knot Filament/Wire, 2 in Arbor Hole
Weiler® 10 in standard twist knot wire Wheel Brush provides a heavy duty brushing action with some flexibility for demanding deburring cleaning and surface preparation applications on somewhat irregular surfaces. Featuring Weiler® individual knot hole construction, these radial brushes are available in heat treated steel, type 302 stainless steel and bronze wire for use in a wide variety of applications. 2 in arbor hole for use on bench/pedestal grinder, die grinder, right angle die grinder and straight grinders.
Dichtomatik N70435 O-Ring, 435 Dash Number, 5.725 in ID x 6.275 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
