Gates® Power Transmission Poly Chain® GT®2 8MX-63S-21 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 6.253 in OD, 63 Grooves, 6.316 in Dia Pitch, 1.2 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
-
BrandGates® Power Transmission
-
UPC72053271072
-
Manufacturer Part Number8MX-63S-21
-
CountryUSA|Canada
-
Face Width1.2 in
-
Bushing Type2012
-
Pitch8 mm
-
Pitch Diameter6.316 in
-
MaterialDuctile Iron
-
Flange Diameter6.72 in
-
Series7718
-
Hub Diameter3.76 in
-
Number of Grooves63
-
Outside Diameter6.253 in
-
Bore Diameter1/2 to 2-1/8 in
-
Bore TypeTaper-Lock®
-
Overall Length1-1/4 in
-
Suitable For Use With21 mm W Poly Chain® Belt
- Full split in bushing allows easy installation and removal
- Poly Chain® GT®2 sprockets keep overhung load below manufacturers recommendation
- Precise sprocket design produces positive, press fit to shaft
- Sprockets are precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77182063
-
UNSPSC31171900
-
Package DescriptionEACH
-
Catalog
-
Instruction/Installation Manual
-
Full Engineering Drawing
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 8MX-63S-21 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 6.253 in OD, 63 Grooves, 6.316 in Dia Pitch, 1.2 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
JASON 390L100 3/8-" L PITCH STANDARD TIMING BELT. 39-" PITCH LENGTH, 104 TEETH 1 MM WIDTH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS390L100 >
MORSE® 29147 1655H Chucking Reamer, 0.117 in Dia x 3-1/2 in OAL, 0.112 in Dia Straight Shank, Straight Flute
MORSE® 29147 1655H Chucking Reamer, 0.117 in Dia x 3-1/2 in OAL, 0.112 in Dia Straight Shank, Straight Flute
Gates® Power Transmission Poly Chain® GT®2 8MX-48S-21 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 4.749 in OD, 48 Grooves, 4.812 in Dia Pitch, 1-1/4 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
#16-14" NYLON RING TERMINAL--PK/100-PENR6B10C >
1-1/4"-SQUARE ID AG BEARINGS-FAFGW209PPB8>
