Gates 40-T 8-MM-PITCH TL T/BELT SHEAVES GAT 8-MX-40-S-12
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
-
BrandGates® Power Transmission
-
UPC72053270594
-
Manufacturer Part Number8MX-40S-12
-
CountryUSA|Canada
-
Face Width0.85 in
-
Bushing Type2012
-
Pitch8 mm
-
Pitch Diameter4.01 in
-
MaterialDuctile Iron
-
Flange Diameter4.41 in
-
Series7718
-
Hub Diameter3.55 in
-
Number of Grooves40
-
Outside Diameter3.947 in
-
Bore Diameter1/2 to 2-1/8 in
-
Bore TypeTaper-Lock®
-
Overall Length1-1/4 in
-
Suitable For Use With12 mm W Poly Chain® Belt
- Full split in bushing allows easy installation and removal
- Poly Chain® GT®2 sprockets keep overhung load below manufacturers recommendation
- Precise sprocket design produces positive, press fit to shaft
- Sprockets are precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77181040
-
UNSPSC31171900
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Catalog
-
Full Engineering Drawing
Recently Viewed
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
MCR Safety S2115 Blackjack®Plus Safety Glasses, Duramass® Hard Coat, Light Gray Lens, Frameless Frame, Polished Chrome, Metal Frame, Polycarbonate Lens, ANSI Z87+, AS/NZS 1337.1
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Dodge® SDSX1-3/4 Type SDS QD Bushing, 1-3/4 in Dia Bore, 2-3/16 in Dia Barrel, 3-3/16 in Dia Flange, 1-5/16 in OAL, Ductile Iron
Dodge® QD® bushings have a flanged design and feature a 4 deg taper with conventional or reverse mounting. They are stocked in popular finished bore sizes and minimum plain bore for custom reboring.
KWIKWELD QUICK SETTING STEEL REINFORCED EPOXY SYRINGE - JBW50176>
