Gates® Power Transmission Poly Chain® GT®2 14MX-32S-68 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 5-1/2 in OD, 32 Grooves, 5.614 in Dia Pitch, 3.33 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
-
BrandGates® Power Transmission
-
UPC72053460865
-
Manufacturer Part Number14MX-32S-68
-
CountryUSA|Canada
-
Face Width3.33 in
-
Bushing Type2517
-
Pitch14 mm
-
Pitch Diameter5.614 in
-
MaterialCast Iron
-
Flange Diameter6.11 in
-
Series7719
-
Hub Diameter4.22 in
-
Number of Grooves32
-
Outside Diameter5-1/2 in
-
Bore Diameter1/2 to 2-11/16 in
-
Bore TypeTaper-Lock®
-
Suitable For Use With68 mm W Poly Chain® Belt
- Full split in bushing allows easy installation and removal
- Poly Chain® GT®2 sprockets keep overhung load below manufacturers recommendation
- Precise sprocket design produces positive, press fit to shaft
- Sprockets are precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77196032
-
UNSPSC31171900
-
Package DescriptionEACH
-
Full Engineering Drawing
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 14MX-32S-68 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 5-1/2 in OD, 32 Grooves, 5.614 in Dia Pitch, 3.33 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Coilhose® NC0862-500N Standard Nylon Tubing, 3/8 in ID x 1/2 in OD x 500 ft L, 0.062 in THK Wall, Domestic
Coilhose® NC0862-500N Standard Nylon Tubing, 3/8 in ID x 1/2 in OD x 500 ft L, 0.062 in THK Wall, Domestic
MCR Safety 9672M Gloves, M, Polyurethane Coating, Dyneema®, Knit Wrist Cuff, Resists: Abrasion, Cut, Puncture and Tear, ANSI Cut-Resistance Level: A3, ANSI Puncture-Resistance Level: 2, Ambidextrous Hand
MCR Safety CutPro® 13-Gauge Dyneema® Diamond Technology Shell Cut Resistant Work Gloves Polyurethane (PU) Coated Palm and Fingertips Micro-particle boosted high strength fiber provides cool-touch comfort and maximum durability One of the most distinguishing characteristics of Dyneema® Fiber is its cool-to-touch property. This fiber's inherent ability to dissipate body heat and pass moisture from the inside of the glove to the outside results in longer wear time, which promotes greater hand protection. The 9672 features a 13-gauge salt and pepper color Dyneema® Diamond Technology shell with a rugged gray PU coating on the palm and fingertips. The cut-resistant properties of this glove, combined with its outstanding abrasion and puncture resistance, make it an excellent choice for tough jobs. Are you looking for the best cut-resistant gloves? Look no further than MCR Safety's CutPro® cut-resistant options.
15-TOOTH #80-1 CHAIN SPROCKETS IDC 80-B-15-F-1-1/8
15 TOOTH SPROCKETS FOR #80 CHAIN
3 -FEMALE PIPE THREAD SCHEDULE 80 METAL BLACK UNIONS
1"-FEMALE PIPE THREAD X 1/2"-FEMALE PIPE THREAD STAINLESS STEEL REDUCERS-FIT1X1/2SSR>
