Gates® Power Transmission Super HC® Molded Notch PowerBand® 3/5VX1900 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 190 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
-
BrandGates® Power Transmission
-
UPC72053236750
-
Manufacturer Part Number3/5VX1900
-
CountryUSA|Canada
-
Temperature Range-60 to 250 deg F
-
Thickness35/64 in
-
MaterialEPDM
-
Top Width5/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Minimum Pulley Diameter7.958 in
-
Section Size5VX
-
Series9389
-
Number of Ribs3
-
Outside Length190 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Patented ethylene material construction provides -60 to 250 deg F temperature range to resist belt cracking
-
Alternative Part Number93893190
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Super HC® Molded Notch PowerBand® 3/5VX1900 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 190 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
Remke Tuff-Seal™ RSR-311 Straight Cord Grip Connector, 1 in Trade, 0.562 to 0.688 in Cable Openings, Aluminum
Tuff-Seal™ RSR series aluminum cord grips are UL listed and CSA certified for use in both indoor and outdoor applications to prevent cable pullout, control arc of bend and to provide a tight seal against environmental elements such as dirt, moisture and coolants. The breadth of the line encompasses conduit sizes from 1/4 to 4 in with fittings offered in machined aluminum, nickel plated aluminum, steel, stainless steel, nylon and Valox®.
OIL SEALS-.866" X 1.417" X .276"-CHI563950>
.984X1.417" X .275" OIL SEAL-CHI9768 >
3/4 -MALE PIPE THREADX2 BLACK NIPPLE
• Shaft Diameter (Bore): 2-7/16 in (61.912 mm)
• Overall Housing Length/Height: 6-57/64 in (175 mm)
• Bolt Hole Center-to-Center: 5-5/8 in (143 mm)
• Mounting Bolt Sizing: 5/8 in (M16)
• Bearing Insert Model: UC212-39 (Dual set screws at 120°)
• Basic Dynamic Load Rating: ~11,800 lbf (52.4 kN)
• Basic Static Load Rating: ~8,120 lbf (36.2 kN)
