Gates 6-GROOVE BANDED 3-V-400 V-BELTS GAT 6/3-V-400
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053761924
-
Manufacturer Part Number6/3V400
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness21/64 in
-
MaterialChloroprene
-
Top Width3/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Non-Notched Raw Edge
-
Minimum Pulley Diameter3.82 in
-
Section Size3V
-
Series9385
-
Number of Ribs6
-
Outside Length40 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
-
Alternative Part Number93856040
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
3/8" X 2" SCHEDULE 80 BLACK NIPPLE-FIT3/8X2XHBN >
Gates® Power Transmission Super HC® Molded Notch PowerBand® 5/5VX1180 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 118 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
GEAR OIL HAND PUMP FOR 5-GAL BUCK-GRC226289 >
Browning® Classical Gripbelt® 1026129 AK Series Type 2 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 2.8 in OD, 2.8 in (A)/2.26 in (3L) Dia Pitch, 21/32 in W Face
Browning® Classical Gripbelt® 1026129 AK Series Type 2 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 2.8 in OD, 2.8 in (A)/2.26 in (3L) Dia Pitch, 21/32 in W Face
Gates® Power Transmission Predator® PowerBand® 4/5VP1600 Banded Heavy Duty V-Belt, 5VP Section, 5/8 in W Top, 160 in L Outside, 35/64 in THK, Chloroprene
Made to take on your toughest jobs, Predator Single & PowerBand banded belts are the market leading heavy duty V-belts. The stronger than steel extra heavy-duty belt construction is designed to handle high horsepower motors, frequent shock loads, high heat and the harshest operating environments in extremely demanding applications. They provide extraordinary high-impact strength, capacity and wear resistance. Unique in their extreme robustness and high load carrying capability, they are unrivaled.
