Gates® Power Transmission Super HC® PowerBand® 5/3V950 Banded Heavy Duty V-Belt, 3V Section, 3/8 in W Top, 95 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053287707
-
Manufacturer Part Number5/3V950
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness21/64 in
-
MaterialChloroprene
-
Top Width3/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter3.82 in
-
Section Size3V
-
Series9385
-
Number of Ribs5
-
Outside Length95 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
-
Alternative Part Number93855095
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Super HC® PowerBand® 5/3V950 Banded Heavy Duty V-Belt, 3V Section, 3/8 in W Top, 95 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
TA0107L25 Dodge® Torque-Arm™ II 906000 Heavy Duty Single and Double Reduction Speed Reducer, Solid Shaft Input, Tapered Hollow Bore Output, 25 hp, 40:1 Gear
With 60 years of proven dependability and more than 1.8 million units in service throughout the world, Dodge® Torque-Arm™ speed reducers are the standard of the industry and the benchmark to which others are compared. The Torque-Arm™ II is a shaft mount helical gear reducer that mounts directly to the driven shaft with a number of accessories available to produce versatility, cost savings and long life. A long list of standard features makes this reducer suitable for a wide range of environments right off the shelf.
Browning® Classical Gripbelt® 1027895 BK Series Type 1 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 2.6 in OD, 2.1 in (A)/2.6 in (B) Dia Pitch, 13/16 in W Face
Browning® Classical Gripbelt® 1027895 BK Series Type 1 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 2.6 in OD, 2.1 in (A)/2.6 in (B) Dia Pitch, 13/16 in W Face
Browning® Classical Gripbelt® 1027838 BK Series Type 1 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 2-1/2 in OD, 2 in (A)/2-1/2 in (B) Dia Pitch, 13/16 in W Face
Browning® Classical Gripbelt® 1027838 BK Series Type 1 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 2-1/2 in OD, 2 in (A)/2-1/2 in (B) Dia Pitch, 13/16 in W Face
Browning® Classical Gripbelt® 1027887 BK Series Type 1 Single Groove Sheave, Finished Bore, 3/4 in Dia Bore, 2.6 in OD, 2.1 in (A)/2.6 in (B) Dia Pitch, 13/16 in W Face
Browning® Classical Gripbelt® 1027887 BK Series Type 1 Single Groove Sheave, Finished Bore, 3/4 in Dia Bore, 2.6 in OD, 2.1 in (A)/2.6 in (B) Dia Pitch, 13/16 in W Face
Browning® Classical Gripbelt® 1027853 BK Series Type 1 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 2-1/2 in OD, 2 in (A)/2-1/2 in (B) Dia Pitch, 13/16 in W Face
Browning® Classical Gripbelt® 1027853 BK Series Type 1 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 2-1/2 in OD, 2 in (A)/2-1/2 in (B) Dia Pitch, 13/16 in W Face
