Gates® Power Transmission Super HC® PowerBand® 3/3V560 Heavy Duty Non-Notched Raw Edge V-Belt, 3V Section, 3/8 in W Top, 56 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC072053261417
-
Manufacturer Part Number3/3V560
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness21/64 in
-
MaterialChloroprene
-
Top Width3/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Non-Notched Raw Edge
-
Minimum Pulley Diameter3.82 in
-
Section Size3V
-
Series9385
-
Number of Ribs3
-
Outside Length56 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
-
Alternative Part Number93853056
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Super HC® PowerBand® 3/3V560 Heavy Duty Non-Notched Raw Edge V-Belt, 3V Section, 3/8 in W Top, 56 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Dixon® DCP3703 Air Chief ARO Quick Connect Plug, 3/8 in Nominal, Quick Connect Plug x MNPT, 300 psi Pressure, Steel, Domestic
Dixon® DCP3703 Air Chief ARO Quick Connect Plug, 3/8 in Nominal, Quick Connect Plug x MNPT, 300 psi Pressure, Steel, Domestic
SIZE-9 GRANGE KNEE-BOOTS - LAC1500409>
Bando Synchro-Link® 394L075G Trapezoidal Synchronous Timing Belt, 105 Teeth, 3/8 in Pitch, 39.38 in OAL, 3/4 in W, Neoprene
The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance - especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt and moisture.
Gates® Power Transmission PowerGrip® PB32MXL025 Mini Extra Light Duty Timing Pulley With Set Screws, 1/4 to 1/4 in Dia Bore, 0.795 in OD, 32 Grooves, 0.815 in Dia Pitch, 0.389 in W Face
PowerGrip Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts._x000D_
Gates® Power Transmission PowerGrip® PB72XL037 Extra Light Duty Timing Pulley With Set Screws, 3/8 to 1 in Dia Bore, 4.564 in OD, 72 Grooves, 4.584 in Dia Pitch, 0.563 in W Face
PowerGrip Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts._x000D_
