Gates® Power Transmission Hi-Power® II BB285 Banded Heavy Duty Double V-Belt, BB Section, 21/32 in W Top, 286 in L Outside, 17/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
-
BrandGates® Power Transmission
-
UPC770075414629
-
Manufacturer Part NumberBB285
-
CountryUSA|Canada
-
Thickness17/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter5.73 in
-
Section SizeBB
-
Series9053
-
Number of Ribs1
-
Outside Length286 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
-
Alternative Part Number90530285
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Hi-Power® II BB285 Banded Heavy Duty Double V-Belt, BB Section, 21/32 in W Top, 286 in L Outside, 17/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
IKO PILLOBALL PHSB5LNF Inch Series Insert/Lubrication Type Rod End With Zerk Type Grease Nipple, 5/16 in Dia Bore, 7/8 in OD, 0.437 in W, 6800 N Dynamic/16500 N Static Load
PILLOBALL self-aligning Rod Ends can be used as link mechanisms in a variety of machines and are designed for easy installation.
Crosby® 1010514 Fist Grip® G-429-3/8 Wire Rope Clip, 3/8 in, Forged Steel, 2 Clips, 5-1/4 in Rope Turn Back
Crosby® 1010514 Fist Grip® G-429 Wire Rope Clip, 3/8 in, Forged Steel, 2 Clips, 5-1/4 in Rope Turn Back
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
FYH® UCPX08 24 UCP Medium Duty Pillow Block Unit, 1-1/2 in Dia Bore, 6-5/32 in L Bolt Center-to-Center, 2-5/16 in Base to Bore Centerline, 8-3/4 in OAL 4-1/2 in OAH
FYH® UCPX08 24 UCP Medium Duty Pillow Block Unit, 1-1/2 in Dia Bore, 6-5/32 in L Bolt Center-to-Center, 2-5/16 in Base to Bore Centerline, 8-3/4 in OAL 4-1/2 in OAH
Dodge® 057603 211 Normal Duty Pillow Block Ball Bearing Unit, 2 in Dia Bore, 6.38 to 7.44 in L Bolt Center-to-Center, 2.44 in Base to Bore Centerline, 8.88 in OAL x 4.9 in OAH
A setscrew shaft attachment method is the most common means of securing a mounted ball bearing to a shaft and also the easiest to install. The Dodge® mounted ball bearing offering is engineered with a 65 deg setscrew angle. This ensures the maximum grip onto the shaft, especially when using premium cup point set screws with the high quality manufacturing of the Dodge® insert.
