Gates® Power Transmission Hi-Power® II AA73 Banded Heavy Duty Double V-Belt, AA Section, 1/2 in W Top, 75 in L Outside, 13/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
-
BrandGates® Power Transmission
-
UPC072053489194
-
Manufacturer Part NumberAA73
-
CountryUSA|Canada
-
Thickness13/32 in
-
MaterialEPDM
-
Top Width1/2 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter4.138 in
-
Section SizeAA
-
Series9052
-
Number of Ribs1
-
Outside Length75 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
-
Alternative Part Number90520073
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Hi-Power® II AA73 Banded Heavy Duty Double V-Belt, AA Section, 1/2 in W Top, 75 in L Outside, 13/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
CAM FOLLOWERS-SMICR1/2X>
Black Stallion® JF1010-LM-2XL Jacket, 2XL, Cotton, Lime, Resists: Flame, ASTM F1506
The Black Stallion JF1010-LM is our 9 Oz Flame Resistant Safety Welding Jacket with FR Triple Trim Reflective Tape. 30 inches in length, the safety lime Welding Jacket is loaded with safety extras. 2” flame-resistant triple trim tape with 3/4” reflective silver helps keep the wearer visible, even in low light or visibility. The Standup Welder's collar helps protect the neck from sparks and splatter while welding, while the left sleeve scribe pocket holds welding markers & pens. A convenient inside pocket holds small items and devices and 6 powder-coated steel front snaps and wrist snaps help keep the fit snug and adjustable. Overall, the JF1010 is ideal for light welding applications where being "seen" is critical (construction, traffic zones, etc.).
3-GRV 3-V-BELT QD SH-BUSH SHEAVES IDC 3/3-V-0315-SH
3 GROOVE 3-V-BELT QUICK DISCONNECT SH-BUSH SHEAVES
Dichtomatik 75102015 O-Ring, 020 Dash Number, 0.864 in ID x 1.004 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
1" -IDX1-3/8" -OD CLEAR VINYL TUBE-PLA30 >
