Gates® Power Transmission Hi-Power® II AA60 Banded Heavy Duty Double V-Belt, AA Section, 1/2 in W Top, 62 in L Outside, 13/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
-
BrandGates® Power Transmission
-
UPC072053200010
-
Manufacturer Part NumberAA60
-
CountryUSA|Canada
-
Thickness13/32 in
-
MaterialEPDM
-
Top Width1/2 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter4.138 in
-
Section SizeAA
-
Series9052
-
Number of Ribs1
-
Outside Length62 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
-
Alternative Part Number90520060
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Hi-Power® II AA60 Banded Heavy Duty Double V-Belt, AA Section, 1/2 in W Top, 62 in L Outside, 13/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
HCI Preferred Supplier 943313 2-Piece Gas Ball Valve, 3/4 in Nominal, FIPS End Style, Forged Brass Body, Regular Port, PTFE/NBR Softgoods
HCI Preferred Supplier 943313 2-Piece Gas Ball Valve, 3/4 in Nominal, FIPS End Style, Forged Brass Body, Regular Port, PTFE/NBR Softgoods
Gates® Power Transmission Hi-Power® II AA68 Banded Heavy Duty Double V-Belt, AA Section, 1/2 in W Top, 70 in L Outside, 13/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
Browning® 1001973 TB Series Solid Type 13 Multiple Sheave With Split Taper Bushing, 1/2 to 1-3/4 in Split Taper Bore, 6.35 in OD, 2 Grooves, 5.8 in (A)/6.3 in (B) Dia Pitch, 1-3/4 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Gates® Power Transmission Poly Chain® ADV™ 14ADV-2380-20 Synchronous Belt, 20 mm W, 2380 mm OAL, 14 mm Pitch, 170 Teeth, Polyurethane
Poly Chain™ ADV™ is the next step in the Poly Chain GT™ Carbon™ family of high performance synchronous belts. Poly Chain ADV has a distinctive red tooth color and offers a 15% increase in load capacity over current Poly Chain GT Carbon belts. Poly Chain ADV belts are intended to replace Poly Chain GT Carbon belts on drive systems with less than desired performance, where some extra load capacity is needed. Poly Chain ADV belts utilize improved technologies never before seen in power transmission belts, making Gates Poly Chain the most advanced belt in the world.
Browning® 1059369 Type H2 Multiple Sheave, 3/8 to 1-1/2 in Split Taper Bore, 3.35 in OD, 2 Grooves, 3.3 in Dia Pitch, 1-3/32 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
