Gates® Power Transmission Hi-Power® II C390 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 392 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
-
BrandGates® Power Transmission
-
UPC72053209891
-
Manufacturer Part NumberC390
-
CountryUSA|Canada
-
Thickness17/32 in
-
MaterialEPDM
-
Top Width7/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter7.958 in
-
Section SizeC
-
Series9004
-
Number of Ribs1
-
Outside Length392 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
- Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging
-
Alternative Part Number90042390
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Hi-Power® II C390 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 392 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
United Abrasives-SAIT 28071 General Purpose Bench Grinding Wheel, 14 in Dia x 2 in THK, 1-1/2 in Center Hole, 46 Grit, Aluminum Oxide Abrasive
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP2400-8MGT-50 9232 Synchronous Belt, 300 Teeth, 8 mm Pitch, 2400 mm OAL, 50 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
Gates® Power Transmission Micro-V® 560L24 Heavy Duty V-Belt, L Section, 3/16 in W Top, 56 in L Outside, 1/4 in THK, Polychloroprene Rubber
Gates Micro-V® belts ensure outstanding performance on any industrial multi-ribbed drive. They cover a multitude of industrial applications and are suitable for industrial drives in washing machines, textile machines, vacuum cleaners, lawn mowers, machine tools, medical equipment and many more. Exclusive truncated (shortened) profile gives Gates Micro-V belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves. The full line of Micro-V belt products includes slabs in several widths as well as single belts in J, K, L and M sections in order to perfectly match customer requirements.
Justrite® 10575 Bench Can, 2 gal Capacity, 11-1/2 in Dia x 5-7/8 in H, Galvanized Steel, Red
An easy means of cleaning small parts in solvent, simply place work on spring-loaded, perforated dasher plate, press down and agitate, then release to return dasher to drain position. Plated steel dasher also works as an effective flame arrester to reduce the risk of fire flashback. Hinged cover minimizes evaporation losses and protected rim reduces the possibility of hand injury. For safe storage and transport of flammable liquids to protect workers and reduce risk of fire and explosions during transporting, transferring, storing and dispensing flammable liquids in industries like pharma, chemical and oil and gas.
HCI Preferred Supplier 28321 Bulkhead Coupling With 7/8-20 UNCF Thread, 1/2 in x 3/8-18 Nominal, Tube x FNPT End Style, Brass
HCI Preferred Supplier 28321 Bulkhead Coupling With 7/8-20 UNCF Thread, 1/2 in x 3/8-18 Nominal, Tube x FNPT End Style, Brass
