Gates® Power Transmission Tri-Power® BX180 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 183 in L Outside, 13/32 in THK, EPDM
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
-
BrandGates® Power Transmission
-
UPC72053014914
-
Manufacturer Part NumberBX180
-
CountryUSA|Canada
-
Temperature Range-70 to 250 deg F
-
Thickness13/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Minimum Pulley Diameter4.775 in
-
Section SizeBX
-
Series9013
-
Number of Ribs1
-
Outside Length183 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- Belt edge is machined for even sheave groove contact resulting in smoother running, less slip and wear
- Patented ethylene material construction provides -70 to 250 deg F temperature range to resist belt cracking
-
Alternative Part Number90132180
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Tri-Power® BX180 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 183 in L Outside, 13/32 in THK, EPDM
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
Gates® Power Transmission Tri-Power® BX72 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 75 in L Outside, 13/32 in THK, EPDM
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
MCR Safety 92743BPM Cut Pro™ Cut-Resistant Gloves, M, Bi-Polymer Coating, HyperMax™, Knit Wrist Cuff, Resists: Abrasion, Cut, Dirt, Grit, Grime, Puncture and Tear, ANSI Cut-Resistance Level: A7, ANSI Puncture-Resistance Level: 5
MCR Safety CutPro® 13-Gauge HyperMax® HPPE Shell Cut, Abrasion, and Puncture Resistant Work Gloves Bi-polymer Coated Palm and Fingertips Reinforced thumb crotch The MCR Safety CutPro® 92743BP features a reinforced thumb crotch for added durability. It also provides a seamless salt & pepper HyperMax® HPPE shell that supplies superior cut, tear, and abrasion resistance. The black foam nitrile and water-based PU-coated palm and fingertips provides good gripping ability and hides dirt, grit, and grime. With high cut, abrasion, and puncture-resistant scores, this glove keeps coming back for more. If you are looking for the best cut-resistant gloves, look no further than MCR Safety's CutPro® series cut-resistant options. (Vending packaged option = VP92743BP ).
Gates® Power Transmission Tri-Power® BX26 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 29 in L Outside, 13/32 in THK, EPDM
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
MCR Safety 990XXL General Purpose Gloves, 2XL, Split Leather Palm, Grey, Knit Wrist Cuff
Memphis multitask series feature an assortment of fabrics, designs, and colors at some of our most competitive prices. Comfort, durability, launderable, breathable, and lightweight materials best describe common features for Memphis multitask hand protection. The Memphis Multi-Task 990 is one of the most flexible and comfortable multi-tasks in the market. The 990 features soft Mossy Oak Break Up Infinity® pattern multi-layer stretch fabric on the back and thumb, gray synthetic leather palm with "shattered Max" design. The wing thumb and reinforced thumb crotch add to the comfort and durability of the 990 style.
MCR Safety 8002I Lightweight General Purpose Gloves, Work, Straight Thumb Style, S, 8 oz Jersey, White, Knit Wrist Cuff, Uncoated Coating, Unlined Lining
Natural Jersey Work Gloves Reversible Pattern with Knit Wrist Cotton Polyester Blend Small or Ladies Sizing Reversible pattern Jersey gloves have been used for generations as a lightweight, comfortable option for light duty. They are available in many weights, patterns, and even some with dots for grip. The 8000I is a reversible patterned glove made of natural-colored cotton and is excellent for laundering. The 8-ounce fabric and soft knit wrist make this an all-around comfortable glove! This glove is sized small, perfect for ladies sizing. Are you looking for the best jersey gloves? Look no further than MCR Safety. Ladies sizing.
