Gates® Power Transmission Hi-Power® II B94 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 97 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
-
BrandGates® Power Transmission
-
UPC72053207705
-
Manufacturer Part NumberB94
-
CountryUSA|Canada
-
Thickness13/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter4.775 in
-
Section SizeB
-
Series9003
-
Number of Ribs1
-
Outside Length97 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
- Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging
-
Alternative Part Number90032094
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Hi-Power® II B94 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 97 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Crosby Eye Bolt, Series: G-291, Measurement System: Imperial, 1/4 in Thread, 2 in Shank Length, Forged Steel, Hot Dipped Galvanized, 1/2 in ID Eye, 1 in OD Eye, UNC Thread, 3.06 in Overall Length, 650 lb Working Load, 1-1/2 in Thread Length
Fatigue rated at 1-1/2 times the working load limit at 20000 cycles
Hot dip galvanized after threading (UNC)
Furnished with standard hot dip galvanized hex nuts
Recommended for in-line pull
Importantly, these bolts meet other critical performance requirements including fatigue life, impact properties and material traceability
Gates® Power Transmission Hi-Power® II B90 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 93 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
United Abrasives-SAIT 1AX Blue Line™ 57511 Portable Semi-Friable Coated Abrasive Belt, 3 in W x 24 in L, 240 Grit, Very Fine Grade, Aluminum Oxide Abrasive, Cotton Backing
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
FYH® UCPX06 19 UCP Medium Duty Pillow Block Unit, 1-3/16 in Dia Bore, 5 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 1-7/8 in OAL 3-21/32 in OAH
FYH® UCPX06 19 UCP Medium Duty Pillow Block Unit, 1-3/16 in Dia Bore, 5 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 1-7/8 in OAL 3-21/32 in OAH
