Gates® Power Transmission Hi-Power® II B69 Banded Classical Heavy Duty V-Belt, B Section, 21/32 in W Top, 72 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
-
BrandGates® Power Transmission
-
UPC72053207194
-
Manufacturer Part NumberB69
-
CountryUSA|Canada
-
Thickness13/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Classical Heavy Duty
-
Minimum Pulley Diameter4.775 in
-
Section SizeB
-
Series9003
-
Number of Ribs1
-
Outside Length72 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
- Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging
| Competitor Name | Competitor Part Number |
|---|---|
| Motion Industries | 00714098 |
-
Alternative Part Number90032069
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Gates® Power Transmission Hi-Power® II B69 Banded Classical Heavy Duty V-Belt, B Section, 21/32 in W Top, 72 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
UNION 68107 2 PRONG 48" WEEDING HOE. 3-3/4" X 9-3/8" SHANK PATTERN STEEL BLADE. 48" ASH WOOD HANDLE
FOR WEEDING AND FURROWING IN MOST SOIL TYPES.
-UNI68107 >
MORSE® 22589 1680 Taper Pin Reamer, #2 Taper Pin, 0.2008 in Dia Reamer, 0.1605 in Dia Small End, Straight Flute, Straight Shank
MORSE® 22589 1680 Taper Pin Reamer, #2 Taper Pin, 0.2008 in Dia Reamer, 0.1605 in Dia Small End, Straight Flute, Straight Shank
Gates® Power Transmission Hi-Power® II B221 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 222 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
MORSE® 22590 1680, #3, 0.1813 in Small End, Straight Flute, Straight Shank
Dichtomatik 75102139 O-Ring, 217 Dash Number, 1.171 in ID x 1.449 in OD, FKM, 75 Shore A Durometer, Import, Custom 217-VITON
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
