Gates® Power Transmission Hi-Power® II PowerBand® 4/B66 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 69 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
-
BrandGates® Power Transmission
-
UPC72053275636
-
Manufacturer Part Number4/B66
-
CountryUSA|Canada
-
Thickness13/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter5.73 in
-
Section SizeB
-
Series9093
-
Number of Ribs4
-
Outside Length69 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
-
Alternative Part Number90934066
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Hi-Power® II PowerBand® 4/B66 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 69 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Smith Bearing® SMITH XTREME™ NUKR-35 Crowned Double Row Heavy Duty Roller Stud Type Needle Bearing Cam Follower, 35 mm Dia x 18 mm W Roller, 16 mm Dia x 32.5 mm L Stud, 52100 Steel Roller
Made with a double row of heavy rollers for extremely high load applications. These heavy duty bearings are assembled with metallic side shields helping to retain grease and keep out containments.
Gates® Power Transmission Hi-Power® II CC120 Banded Heavy Duty Double V-Belt, CC Section, 7/8 in W Top, 124 in L Outside, 23/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
Gates® Power Transmission PowerGrip® HTD® 159-3M-15 Synchronous Belt, 15 mm W, 159 mm OAL, 3 mm Pitch, 53 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
Smith Bearing® CR-1-3/8-XB Cylindrical Stud Type Needle Bearing Cam Follower, 1-3/8 in Dia x 3/4 in W Roller, 1/2 in Dia x 1-1/4 in L Stud, 52100 Steel Roller
Hex head stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel.
Smith Bearing® HR-7/8-XB Cylindrical Stud Type Needle Bearing Cam Follower, 7/8 in Dia x 1/2 in W Roller, 7/16 in Dia x 7/8 in L Stud, 52100 Steel Roller
The HR Series have a larger diameter stud and are recommended for applications with high running loads and/or heavy shocks where deflection should be held to a minimum. Rollers and outer races are identical to the standard CR Series. Manufactured from high alloy bearing quality steel.
