Gates® Power Transmission Hi-Power® II A68 Banded Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 70 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
-
BrandGates® Power Transmission
-
UPC072053202274
-
Manufacturer Part NumberA68
-
CountryUSA|Canada
-
Thickness5/16 in
-
MaterialEPDM
-
Top Width1/2 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Classical Heavy Duty
-
Minimum Pulley Diameter4.138 in
-
Section SizeA
-
Series9002
-
Number of Ribs1
-
Outside Length70 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
- Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging
| Competitor Name | Cross-Reference Number |
|---|---|
| Motion Industries | 00677823 |
-
Alternative Part Number90022068
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Hi-Power® II A68 Banded Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 70 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
MasterDrive 6B70SF Type A-1 Groove Sheave, 1/2 to 2-15/16 in Dia Bore, 7.35 in Dia Outside, 6 Grooves, 6.6 in (A)/7 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
Black Stallion 92CL Split Cowhide Leggings with Metal Side Bar Support is made of durable side split cowhide. 15.5 inch in length, the Kevlar® stitching and metal side bar internal support keep your legs and feet protected. Hook and loop top closures keep it comfortable secure.
Incandescent lamps are still commonly used in homes and businesses and with our wide selection, we have enough shapes, wattages and finishes to fit almost every application and need. Many of our incandescent lamps are also available in an extended life, 130 VAC version, with even more environmentally friendly alternatives coming soon.
Sioux Chief 828-2PK Shower Module Drain, 2 in Nominal, Push-On Connection, 4-1/4 in, PVC Drain
Sioux Chief 827 or 828 series shower module drain shall be used where necessary in drainage systems. Shower drain shall have an outer locknut design with compression gasket connection for Sch. 40 ABS/PVC pipe. Snap-in strainer shall meet all applicable load and flow requirements for intended use. Designed in accordance with ASME A112.18.2-2005/CSA B125.2-05.
Browning 10:1 RAIDER WORM GEAR REDUCERS BRW 516-Q-210-LR-10
With a large variety of add on accessories, the Raider® Plus worm gear reducer is a problem solver. Four available styles make it the most flexible worm gear product in the drives and components portfolio. These are the universal style ("U" style, shaft input) with an output shaft and the C-face style ("Q" style, input quill) with an output shaft. Both the "U" and "Q" styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors. The Raider Plus worm gear reducer product line features a center distance range from 1 to 6 in with ratios from 5:1 to 60:1. It also contains an output torque range from 200 to 10000 ft-lb. Additionally, the line is an industry leader due to its patented design technology and manufacturing techniques.
