Timing Belts
Browning® 3549003 Type B Synchronous Belt, 60 Teeth, 8 mm Pitch, 480 mm OAL, 20 mm W, Neoprene
Browning® 3549003 Type B Synchronous Belt, 60 Teeth, 8 mm Pitch, 480 mm OAL, 20 mm W, Neoprene
Browning® 3111861 Double Sided Type L Synchronous Belt, 80 Teeth, 3/8 in Pitch, 30 in OAL, 1/2 in W, Neoprene
Browning® 3111903 Double Sided Type H Synchronous Belt, 66 Teeth, 1/2 in Pitch, 33 in OAL, 1 in W, Neoprene
Bando Synchro-Link® 394L100G Trapezoidal Synchronous Timing Belt, 105 Teeth, 3/8 in Pitch, 39.38 in OAL, 1 in W, Neoprene
The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance - especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt and moisture.
Bando Synchro-Link® 394L075G Trapezoidal Synchronous Timing Belt, 105 Teeth, 3/8 in Pitch, 39.38 in OAL, 3/4 in W, Neoprene
The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance - especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt and moisture.
Bando Synchro-Link® 394L050G Trapezoidal Synchronous Timing Belt, 105 Teeth, 3/8 in Pitch, 39.38 in OAL, 1/2 in W, Neoprene
The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance - especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt and moisture.
Recently Viewed
Browning® 767740 VPS 100 Intermediate Duty Pillow Block Ball Bearing, 1 in Dia Bore, 3-21/32 to 4-7/32 in L Bolt Center-to-Center, 1-7/16 in Base to Bore Centerline, 5 in OAL x 2-11/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Morse® 116121 MHSA Advanced Hole Saw With Arbor, 3/4 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 1/2-20 Arbor
Morse, MHSA12C (116121), 3/4" (19mm) diameter, arbored, bimetal hole saw is designed for general purpose use, cutting a wide range of materials including stainless steel, machinable metals, wood and plastic. Aggressive, positive rake tooth profile penetrates material easier and faster. Unique side slot increases leaverage access for various thicknesses of materials, easing slug removal. One (1) hole saw per card. To optimize performance consider using Morse CUTLUBE (121408).
