Gates® Power Transmission PowerGrip® Twin Power® TP450H100 Heavy Timing Belt, 1 in W, 45 in OAL, 1/2 in Pitch, 90 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
-
BrandGates® Power Transmission
-
UPC72053205824
-
Manufacturer Part NumberTP450H100
-
CountryUSA|Canada
-
Pitch1/2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeHeavy
-
Minimum Pulley Diameter3.77 in
-
Width1 in
-
Series9246
-
Number of Teeth90
-
Overall Length45 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Gates® Twin Power® belts have nylon facing on both tooth surfaces providing equal load carrying capabilities on either side of the belt
- Quieter than roller chain drives and eliminates lubrication and re-tensioning to reduce maintenance and labor
- Neoprene body provides protection against grime, grease, oil and moisture
- Belt capacity is equal to standard single-sided PowerGrip® timing belts
- Twin Power® belts have teeth on both sides to provide synchronization from both driving surfaces
-
Alternative Part Number92463207
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® Twin Power® TP450H100 Heavy Timing Belt, 1 in W, 45 in OAL, 1/2 in Pitch, 90 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
HUB & BUSHING ASSEMBLY-RECS600640>
Magnolia Brush 3029 Vehicle Wash Brush, 9 in L Block, 2-5/8 in L Polystyrene Trim
Dixon® DCP3823 Air Chief ARO Quick Connect Plug, 3/8 in Nominal, Quick Connect Plug x FNPT, 300 psi Pressure, Steel, Domestic
Dixon® DCP3823 Air Chief ARO Quick Connect Plug, 3/8 in Nominal, Quick Connect Plug x FNPT, 300 psi Pressure, Steel, Domestic
HCI Preferred Supplier 28115 Hex Head Bushing, 1 x 3/4 in Nominal, MNPT x FNPT End Style, Brass
HCI Preferred Supplier 28115 Hex Head Bushing, 1 x 3/4 in Nominal, MNPT x FNPT End Style, Brass
HCI Preferred Supplier 6405O2020 Hydraulic Adapter, 1-5/8-12 x 1-1/4 in Nominal, Male O-Ring Boss™ x FNPT, Steel
HCI Preferred Supplier 6405O2020 Hydraulic Adapter, 1-5/8-12 x 1-1/4 in Nominal, Male O-Ring Boss™ x FNPT, Steel
