Gates® Power Transmission PowerGrip® 270H075 Heavy Timing Belt, 3/4 in W, 27 in OAL, 1/2 in Pitch, 54 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053565430
-
Manufacturer Part Number270H075
-
CountryUSA|Canada
-
Pitch1/2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeHeavy
-
Minimum Pulley Diameter3.13 in
-
Width3/4 in
-
Series9257
-
Number of Teeth54
-
Overall Length27 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92573101
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® 270H075 Heavy Timing Belt, 3/4 in W, 27 in OAL, 1/2 in Pitch, 54 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
MADE OF POLYPROPYLENE THAT IS GLASS FILLED FOR RUGGED STRENGTH AND DURABILITY. ECONOMICAL AND SUPERIOR IN PERFORMANCE. MAXIMUM OPERATING 75 PSI. PRECISION MOLDED, UNIFORM AND ACCURATE FIT. STAINLESS STEEL RINGS, ARMS & PINS.
-BAJ400F >
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
BANJO HB-050/075-90 3/4" BARBED X 1/2" MNPT 90 DEGREE ELBOW.
EXCELLENT CHEMICAL RESISTANCE, GLASS REINFORCED POLYPROPYLENE. HEAVY DUTY-SCHEDULE 80. NPT THREAD. MAXIMUM OPERATING PRESSURE 300 PSI
- BAJHB050/07590 >
