Gates® Power Transmission PowerGrip® 290XL037 Extra Light Timing Belt, 3/8 in W, 29 in OAL, 0.2 in Pitch, 145 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC072053563368
-
Manufacturer Part Number290XL037
-
CountryUSA|Canada
-
Pitch0.2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeExtra Light
-
Minimum Pulley Diameter0.62 in
-
Width3/8 in
-
Series9257
-
Number of Teeth145
-
Overall Length29 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92571323
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® 290XL037 Extra Light Timing Belt, 3/8 in W, 29 in OAL, 0.2 in Pitch, 145 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Gunk® MotorMedic® M4412 Dot 3 Super Heavy Duty Brake Fluid, 12 oz Plastic Bottle, Liquid, Light Yellow to Amber, Mild
Gunk® MotorMedic® M4412 Dot 3 Super Heavy Duty Brake Fluid, 12 oz Plastic Bottle, Liquid, Light Yellow to Amber, Mild
The Holcutters™, are not hole saws. They're precision ground, heat treated tools that easily cut thru the stock rather than ripping, tearing and pushing thru as do typical hole saws. They can produce holes three times faster and cleaner than hole saws in sheet metal and have dramatically extend tool life, too. All sizes have a "shoulder" to prevent plunge-thru, which is especially useful when drilling into live electrical boxes.
The Holcutters™, are not hole saws. They're precision ground, heat treated tools that easily cut thru the stock rather than ripping, tearing and pushing thru as do typical hole saws. They can produce holes three times faster and cleaner than hole saws in sheet metal and have dramatically extend tool life, too. All sizes have a "shoulder" to prevent plunge-thru, which is especially useful when drilling into live electrical boxes.
Liquid Wrench® CERFLON® M914 Heavy Duty Silicone Lubricant, 11 oz Aerosol Can, Aerosol Can/Liquid Form, Pale Yellow
Liquid Wrench® CERFLON® M914 Heavy Duty Silicone Lubricant, 11 oz Aerosol Can, Aerosol Can/Liquid Form, Pale Yellow
Dichtomatik N70105 O-Ring, 105 Dash Number, 0.143 in ID x 0.349 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
