Gates® Power Transmission PowerGrip® Twin Power® TP420L050 Light Timing Belt, 1/2 in W, 42 in OAL, 3/8 in Pitch, 112 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
-
BrandGates® Power Transmission
-
UPC072053614961
-
Manufacturer Part NumberTP420L050
-
CountryUSA|Canada
-
Pitch3/8 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeLight
-
Minimum Pulley Diameter2.83 in
-
Width1/2 in
-
Series9246
-
Number of Teeth112
-
Overall Length42 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Gates® Twin Power® belts have nylon facing on both tooth surfaces providing equal load carrying capabilities on either side of the belt
- Quieter than roller chain drives and eliminates lubrication and re-tensioning to reduce maintenance and labor
- Neoprene body provides protection against grime, grease, oil and moisture
- Belt capacity is equal to standard single-sided PowerGrip® timing belts
- Twin Power® belts have teeth on both sides to provide synchronization from both driving surfaces
-
Alternative Part Number92462114
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® Twin Power® TP420L050 Light Timing Belt, 1/2 in W, 42 in OAL, 3/8 in Pitch, 112 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Gates 5-V-2240 Industrial V-Belts - 5V Section, 5/8 in Top Width, 1 Strand, 224.0000 in Nominal Outside Length, Smooth
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Gates® Power Transmission Metric-Power™ XPA2430 Heavy Duty Molded Notch V-Belt, XPA Section, 13 mm W Top, 2447 mm L Outside, 10 mm THK, EPDM
Manufactured to our exacting standards for quality, safety, and dependability. Their proprietary construction ensures unmatched load-carrying capacity paired with superior flex and stretch resistance.
Gates® Power Transmission Metric-Power™ XPA1700 Heavy Duty Molded Notch V-Belt, XPA Section, 13 mm W Top, 1717 mm L Outside, 10 mm THK, EPDM
Manufactured to our exacting standards for quality, safety, and dependability. Their proprietary construction ensures unmatched load-carrying capacity paired with superior flex and stretch resistance.
