Gates® Power Transmission Synchro-Power® AT10-1080-50 Metric AT Synchronous Belt, 50 mm W, 1080 mm OAL, 10 mm Pitch, 108 Teeth, Polyurethane
Gates Synchro-Power™ polyurethane belts are designed for long-lasting and energy-efficient performance on both power transmission and linear applications. They are available in both endless and open-end versions in various sizes, constructions and tooth designs, handling a wide range of loads, speeds and applications.
-
BrandGates® Power Transmission
-
UPC72053924787
-
Manufacturer Part NumberAT10-1080-50
-
CountryUSA|Canada
-
Pitch10 mm
-
Temperature Range-22 to 176 deg F
-
MaterialPolyurethane
-
Reinforced MaterialSteel
-
TypeMetric AT
-
Width50 mm
-
Series7762
-
Number of Teeth108
-
Overall Length1080 mm
- Abrasion, chemical and wear resistant for extended life
- Steel tensile cord for length stability
-
Alternative Part Number77624141
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Synchro-Power® AT10-1080-50 Metric AT Synchronous Belt, 50 mm W, 1080 mm OAL, 10 mm Pitch, 108 Teeth, Polyurethane
Gates Synchro-Power™ polyurethane belts are designed for long-lasting and energy-efficient performance on both power transmission and linear applications. They are available in both endless and open-end versions in various sizes, constructions and tooth designs, handling a wide range of loads, speeds and applications.
OIL SEALS-2.205" X 2.835" X .354"-CHI22020>
CPVC TO NATIONAL PIPE THREAD ADAPTER-NIB473341/2 >
1.938" X 3.000" X .313" OIL SEAL-CHI19359 >
Gates® Power Transmission Synchro-Power® T10-1150-25 Metric T Synchronous Belt, 25 mm W, 1150 mm OAL, 10 mm Pitch, 115 Teeth, Polyurethane
Gates Synchro-Power™ polyurethane belts are designed for long-lasting and energy-efficient performance on both power transmission and linear applications. They are available in both endless and open-end versions in various sizes, constructions and tooth designs, handling a wide range of loads, speeds and applications.
Dichtomatik 75102179 O-Ring, 257 Dash Number, 5.859 in ID x 6.137 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
