Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP2000-8MGT-30 9232 Synchronous Belt, 250 Teeth, 8 mm Pitch, 2000 mm OAL, 30 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
-
BrandGates® Power Transmission
-
UPC72053611793
-
Manufacturer Part NumberTP2000-8MGT-30
-
CountryUSA|Canada
-
Pitch8 mm
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
Minimum Pulley Diameter59.74 mm
-
Width30 mm
-
Series9232
-
Number of Teeth250
-
Overall Length2000 mm
- Fiberglass tensile cord provides high-strength, excellent flex life and high resistance to elongation
- Belt capacity is equal to standard single-sided PowerGrip® GT®2 belts
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- Gates® Twin Power® belts have nylon facing on both tooth surfaces providing equal load carrying capabilities on either side of the belt
- Twin Power® belts have teeth on both sides to provide synchronization from both driving surfaces
- Substantially quieter operation enables wide application usage
-
Alternative Part Number92320066
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP2000-8MGT-30 9232 Synchronous Belt, 250 Teeth, 8 mm Pitch, 2000 mm OAL, 30 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
Maximize your visibility. All-purpose chests sit below the bedrail accommodating tonneau covers and lids. The model 665-5-01 steel full size chest features a black Armor-Tuf® powder coat finish that ensures years of dependability and has a storage capacity of 13.1 cu ft. The cover opens to 90 degree for maximum access using a unique offset hinge design that still allows installation flush against the truck cab. The rotary-style latch mechanism keeps the cover tight against the weather seal and provides smooth one touch opening.
1-3/8" -ID 2-BOLT FLANGE UNIT-MBUVF2S122M >
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
1-1/4" -ID LOW PILLOW BLOCK UNIT-MBUVPLS220 >
MORSE® 44586 4582 Center Cutting Double End Regular Length End Mill, 5/16 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Bright
MORSE® 44586 4582 Center Cutting Double End Regular Length End Mill, 5/16 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Bright
