Gates® Power Transmission PowerGrip® HTD® 1250-5M-15 Synchronous Belt, 15 mm W, 1250 mm OAL, 5 mm Pitch, 250 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
-
BrandGates® Power Transmission
-
UPC72053936391
-
Manufacturer Part Number1250-5M-15
-
CountryUSA|Canada
-
Pitch5 mm
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
Width15 mm
-
Series9293
-
Number of Teeth250
-
Overall Length1250 mm
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- Thirty percent increase in horsepower ratings, as compared to traditional timing belts
-
Alternative Part Number92932732
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission PowerGrip® HTD® 1250-5M-15 Synchronous Belt, 15 mm W, 1250 mm OAL, 5 mm Pitch, 250 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
Dodge® 128435 205 Normal Duty Pillow Block Ball Bearing Unit, 1 in Dia Bore, 3.69 to 4.5 in L Bolt Center-to-Center, 1.44 in Base to Bore Centerline, 5-1/2 in OAL x 2.77 in OAH
For concentric grip on the shaft and less vibration at higher speeds, specify Dodge® D-LOK® normal- or medium-duty mounted ball bearings. These unique, concentric collar bearings are engineered with features that assure you superior holding power with improved concentricity. Even at high speeds, the D-LOK® bearing grips the shaft tighter and more uniformly for less vibration.
HCI Preferred Supplier 28134 Close Pipe Nipple, 1/2 in Nominal, 1.12 in L, Brass, NPTF End Style
HCI Preferred Supplier 28134 Close Pipe Nipple, 1/2 in Nominal, 1.12 in L, Brass, NPTF End Style
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Sealmaster® 1411008000 TR Series 3-Piece General Purpose Precision Rod End Bearing, 5/8 in Dia Bore, 1-1/2 in OD, 8050 lb Load, Carbon Steel
Sealmaster® two and three piece rod end bearing housing designs have been optimized for overall strength. This housing advantage and variety of outer race materials including brass, steel, DELRIN and PTFE liners provide a wide selection of application solutions. Sealmaster® rod end bearings can be joined together or connected with a threaded rod or tube as linkage assemblies for flexibility in motion transfer. In addition Sealmaster® rod end bearings can accommodate angular misalignment to provide ease in assembly and smooth motion transfer in a variety of applications.
