Gates 20-MM-PITCH X 5000-MM TIMING BELTS GAT 5000-20-M-115
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
-
BrandGates® Power Transmission
-
UPC72053623819
-
Manufacturer Part Number5000-20M-115
-
CountryUSA|Canada
-
Pitch20 mm
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
Minimum Pulley Diameter250.33 mm
-
Width115 mm
-
Series9293
-
Number of Teeth250
-
Overall Length5000 mm
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- Thirty percent increase in horsepower ratings, as compared to traditional timing belts
-
Alternative Part Number92930707
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
Drillco 75A108C 7500 Center Cutting Double End Imperial Stub Length Finishing End Mill, 1/8 in Dia Cutter, 1/4 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
1" X 120" 4-PLY TWISTED-EYE NYLON SLING - SWCNA410 >
1/4"-MALE NATIONAL PIPE THREAD LOC-LINE VALVES--PK/2-PDTLV5521192>
PROJECTOR BULBS
