Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP3150-14MGT-55 9232 Synchronous Belt, 225 Teeth, 14 mm Pitch, 3150 mm OAL, 55 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
-
BrandGates® Power Transmission
-
UPC72053612608
-
Manufacturer Part NumberTP3150-14MGT-55
-
CountryUSA|Canada
-
Pitch14 mm
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
Minimum Pulley Diameter104.16 mm
-
Width55 mm
-
Series9232
-
Number of Teeth225
-
Overall Length3150 mm
- Fiberglass tensile cord provides high-strength, excellent flex life and high resistance to elongation
- Belt capacity is equal to standard single-sided PowerGrip® GT®2 belts
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- Gates® Twin Power® belts have nylon facing on both tooth surfaces providing equal load carrying capabilities on either side of the belt
- Twin Power® belts have teeth on both sides to provide synchronization from both driving surfaces
- Substantially quieter operation enables wide application usage
| Competitor Name | Cross-Reference Number |
|---|---|
| Motion Industries | 00718808 |
-
Alternative Part Number92320156
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP3150-14MGT-55 9232 Synchronous Belt, 225 Teeth, 14 mm Pitch, 3150 mm OAL, 55 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
Dodge® 023102 115 Non-Expansion Type E-Xtra Triple Lip Flange Mount Roller Bearing Unit, 1-15/16 in Dia Bore, 4.38 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 5.63 in OAL/Dia
Dodge® 023102 115 Non-Expansion Type E-Xtra Triple Lip Flange Mount Roller Bearing Unit, 1-15/16 in Dia Bore, 4.38 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 5.63 in OAL/Dia
MasterDrive R2-60MM R2 Series Double Split Tapered Bushing, 60 mm Dia Bore, 4 in Dia Barrel, 5-3/8 in Dia Flange, 4-7/8 in OAL, Ductile Iron
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
Browning® Gearbelt® 1054451 Type 1 Synchronous Timing Pulley With Flange, 1/2 in Finished Bore, 1.641 in OD, 14 Grooves, 1.671 in Dia Pitch, 3/4 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
MasterDrive R2-2.7/8 R2 Series Double Split Tapered Bushing, 2.87 in Dia Bore, 4 in Dia Barrel, 5-3/8 in Dia Flange, 4-7/8 in OAL, Ductile Iron
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
Dodge® 023114 307 Non-Expansion Type E-Xtra Triple Lip Flange Mount Roller Bearing Unit, 3-7/16 in Dia Bore, 7 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 9-1/4 in OAL/Dia
Dodge® 023114 307 Non-Expansion Type E-Xtra Triple Lip Flange Mount Roller Bearing Unit, 3-7/16 in Dia Bore, 7 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 9-1/4 in OAL/Dia
