Nice® 610VBF53 600® Unground Thrust Bearing, 1.031 in Dia Bore, 1.9688 in OD, 5/8 in W, 1404 lb Load
The 600® Series bearing is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from hardenable strip steel and are carefully heat treated. These bearings may be plated or manufactured from stainless steel upon request. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore.
-
BrandNice®
-
UPC637400412296
-
Manufacturer Part Number610VBF53
-
CountryUSA
-
Load Capacity1404 lb
-
Temperature Rating250 deg F
-
Maximum Speed1000 rpm
-
Width5/8 in
-
Series600®
-
Bearing MaterialCarbon Steel
-
Outside Diameter1.9688 in
-
Bore Diameter1.031 in
- These bearings are shipped oiled with a rust preventative
- Suitable for lower speed applications of up to 1000 rpm
- Soft steel band serves as a dust shield
- Designed for moderate loads
- Hardened rings
- Full complement of balls for maximum capacity
- 1010 soft carbon steel band offers ease of installation
- Upper ring is free to rotate and has close fit for shafts
- Lower ring is fixed and has shaft clearance in the bore
- Flat outside ring
- Case hardened carbon steel rings
- Grade 200 carbon steel balls
- Full compliant
- Standard slush
-
UNSPSC31171507
-
Package Description10/PK
-
Standards/ApprovalsASPR|CAS|DFAR|FAR Standards
-
Warranty90 Days
-
Catalog
Recently Viewed
Nice® 610VBF53 600® Unground Thrust Bearing, 1.031 in Dia Bore, 1.9688 in OD, 5/8 in W, 1404 lb Load
The 600® Series bearing is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from hardenable strip steel and are carefully heat treated. These bearings may be plated or manufactured from stainless steel upon request. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore.
WD-40® SPECIALIST® 300004 Fast Acting Rust Release Penetrant Spray, 11 oz Aerosol Can, Liquid, Clear Glass
WD-40® SPECIALIST® RUST RELEASE PENETRANT SPRAY penetrates deep into crevices, threads and seams to break the bonds that hold stuck parts together. Our penetrating lubricant also leaves behind a protective layer and helps prevent rust and corrosion from re-forming. Containing Blu Torch™ Technology, a proprietary blend of synthetic additives, our rust remover spray quickly goes to work on rusted nuts, bolts, threads, locks and chains. It is 50-state VOC compliant and safe to use on plastics, rubber and metal.
BBI 042302 Partially Threaded Cap Screw, 1/2-13, 2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 042302 Partially Threaded Cap Screw, 1/2-13, 2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
Smith Bearing® YR-1-3/8-X Cylindrical Yoke Type Needle Bearing Cam Follower, 3/8 in Dia Bore, 1-3/8 in Dia x 3/4 in W Roller, 4470 lb Dynamic/8600 lb Static Load, 52100 Steel Roller
Yoke type needle roller bearings are recommended where running loads and shock loads are moderate. Manufactured from high alloy bearing quality steel.
3" BLACK CHINA BRISTLE PAINT BRUSH-CCA2630 >
2-1/2"-FPT COMPLETE FOOT VALVE - DXNDFVS30>
