McGill STR-ID SPHERICAL ROLLER BEARINGS MCG SB-22218-W-33-SS
Aerospace and specialty spherical roller bearings utilize barrel shaped rolling elements and have some misalignment capability. These bearings can be manufactured in wide range of styles, materials, sizes and precision classes. All bearings are custom designed based on application needs.
-
BrandMcGill®
-
UPC726166006495
-
Manufacturer Part Number0318006000
-
CountryUSA
-
Load Capacity59200 lb Dynamic/69300 lb Static
-
Cage MaterialSteel
-
Temperature Rating-30 to 300 deg F
-
FinishUncoated
-
Maximum Speed2800 rpm
-
Closure TypeDouble Standard Seal
-
Width1.5748 in
-
Series22200
-
Number of Rows1
-
Bearing Material52100 Steel
-
Outside Diameter6.2992 in
-
Bore Diameter3.5433 in
- Reduced weight/envelope with the same or higher performance
- Longer fatigue life
- Higher operating temperature
- Improved corrosion resistance
- Reduced vibration
- Better fit
- Easier installation
- Improved reliability
- Misalignment capability
- Annular lubrication groove and holes
- Inner ring raceway flanges
- Standard radial internal clearance
- Standard lubrication
- NYLAPLATE® seal on both sides
- Cylindrical outside ring
-
Alternative Part NumberSB 22218 W33 SS
-
UNSPSC31171560
-
Standards/ApprovalsAS9100|Nadcap Certified
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Aerospace and specialty spherical roller bearings utilize barrel shaped rolling elements and have some misalignment capability. These bearings can be manufactured in wide range of styles, materials, sizes and precision classes. All bearings are custom designed based on application needs.
Knipex® SmartGrip™ 85 01 250 SBA Auto Adjusting Box Joint Water Pump Plier, 1-1/4 in Nominal, 1-1/4 in L x 1-3/16 in W CRV Steel V-Shape Jaw, Serrated Jaw Surface, 10 in OAL
Knipex® SmartGrip™ 85 01 250 SBA Auto Adjusting Box Joint Water Pump Plier, 1-1/4 in Nominal, 1-1/4 in L x 1-3/16 in W CRV Steel V-Shape Jaw, Serrated Jaw Surface, 10 in OAL
The Starrett 117 Center Punch is made of specially selected steel, hardened and properly tempered. It is well proportioned, nicely finished and has a knurled finger grip. The points are ground at the proper angle to give maximum service, and the tips are accurately centered. 3" (75mm) Length, 1/16" (1.5mm) Point Diameter.
Coilhose® EC1113 Double Ear Clamp, 1/2 in Nominal, 0.433 in Closed Dia x 0.512 in Open Dia x 0.0394 in THK, Steel, Import
Coilhose® EC1113 Double Ear Clamp, 1/2 in Nominal, 0.433 in Closed Dia x 0.512 in Open Dia x 0.0394 in THK, Steel, Import
