McGill 1"-ID NEEDLE BEARING INNER RACES MCG MI-16
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
-
BrandMcGill®
-
UPC726166000202
-
Manufacturer Part Number0001600000
-
CountryUSA
-
Lubrication Hole TypeLubrication Hole
-
MaterialChrome Steel
-
TypeStandard
-
SeriesMI Series
-
Inside Diameter1 in
-
Outside Diameter1.2491 in
-
Bore TypeRound/Spherical
-
Overall Width1.26 in
-
Suitable For Use WithGUIDEROL® GR RS, GR RSS, GR S, GR SRS, CAGEROL® MR RS, MR RSS, MR S, MR SRS, GR 20, GR 20 SS, MR 20, MR 20 SS Bearing
- AMBA standard 18.2 precision rating
- Thru hardened precision ground rings construction
-
Alternative Part NumberMI 16
-
UNSPSC31171500
-
Standards/ApprovalsMS 51962-11
-
Specification Sheet
-
Catalog
Recently Viewed
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
The McGill® CAMROL® full complement needle bearings feature black oxide treated bearing steel. They are available in two basic mounting styles for use in mechanical automation or linear motion applications. Our basic features each contribute to superior performance. The LUBRIDISC® seal option helps prevent metal to metal contact within the bearing. It also provides a barrier for containment entry and blowout protection when relubricating. These bearings are available with several dimensional choices. The seal options and combinations provide a specific solution for each application. Within the following section you can learn more about these features and how they can be applied to your application.
Koyo B-1110 Inch Series Open Ends Round Bore Uncaged Drawn Cup Needle Roller Bearing, 11/16 in Dia Bore, 7/8 in OD, 1 Row, 5/8 in W, 3720 lb Dynamic/6610 lb Static Load
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
2000-ML CHERRY HAND CLEANER-GOJ7282 >
Liquid Wrench® CERFLON® L616 Grease, 10.25 oz Aerosol Can, Aerosal Spray Form, White
Loctite® 30511 Fast Dry Rigid Cure Gasket Sealant, 3 oz Tube
