McGill® 0000830000 MI Series Narrow Machined Separable Inner Ring With Oil Hole and Annular Groove, 1/2 in ID x 0.7493 in OD, 0.76 in OAW, For Use With GUIDEROL® GR 12 N, CAGEROL® MR 12 N Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
-
BrandMcGill®
-
UPC726166000042
-
Manufacturer Part Number0000830000
-
CountryUSA
-
Lubrication Hole TypeLubrication Hole
-
MaterialChrome Steel
-
TypeNarrow
-
SeriesMI Series
-
Inside Diameter1/2 in
-
Outside Diameter0.7493 in
-
Bore TypeRound/Spherical
-
Overall Width0.76 in
-
Suitable For Use WithGUIDEROL® GR 12 N, CAGEROL® MR 12 N Bearing
- AMBA standard 18.2 precision rating
- Thru hardened precision ground rings construction
-
Alternative Part NumberMI 8 N
-
UNSPSC31171500
-
Standards/ApprovalsMS 51962-2
-
Specification Sheet
-
Catalog
Recently Viewed
McGill® 0000830000 MI Series Narrow Machined Separable Inner Ring With Oil Hole and Annular Groove, 1/2 in ID x 0.7493 in OD, 0.76 in OAW, For Use With GUIDEROL® GR 12 N, CAGEROL® MR 12 N Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
8" UNISTRUT CLAMPS
Bore Diameter (ID): 30 mm (1.1811 inches) Outside Diameter (OD): 62 mm (2.4409 inches) Width: 16 mm (0.6299 inches) Bearing Type: Radial filling-notch max-capacity ball bearing Bore Type: Straight Application Warning: Due to the filling slot design, this bearing is highly optimized for predominant radial loads and should not be used in pure thrust (axial)
14-MJIC X 3/4"-FPT HYD/ADAPTERS-DAY24051412>
The Crescent Nicholson single-cut bastard mill files sharpen mill or circular saws and are ideal for draw filing and finishing metals. The rectangular shape lets you smooth and sharpen straight surfaces. 2 square edges allow you to make grooves fixed at the same width as the file, and all sizes taper slightly in width to improve access in slots.
UNIVERSAL JOINT (NEW # 20-9325)-CHIUJ1373 >
