McGill® 0002400000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 1-1/2 in ID x 1.749 in OD, 1.26 in OAW, For Use With CAGEROL® MR RS, MR RSS, MR S, MR SRS, GR 28, MR 28 SS Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
-
BrandMcGill®
-
UPC726166000431
-
Manufacturer Part Number0002400000
-
CountryUSA
-
Lubrication Hole TypeLubrication Hole
-
MaterialChrome Steel
-
TypeStandard
-
SeriesMI Series
-
Inside Diameter1-1/2 in
-
Outside Diameter1.749 in
-
Bore TypeRound/Spherical
-
Overall Width1.26 in
-
Suitable For Use WithCAGEROL® MR RS, MR RSS, MR S, MR SRS, GR 28, MR 28 SS Bearing
- AMBA standard 18.2 precision rating
- Thru hardened precision ground rings construction
-
Alternative Part NumberMI 24
-
UNSPSC31171500
-
Standards/ApprovalsMS 51962-22
-
Package DescriptionEACH
-
Specification Sheet
-
Catalog
Recently Viewed
McGill® 0002400000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 1-1/2 in ID x 1.749 in OD, 1.26 in OAW, For Use With CAGEROL® MR RS, MR RSS, MR S, MR SRS, GR 28, MR 28 SS Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
1/2" KEY-STOP-DRAIN-JWH406091 >
Bearing cups are heat treated for strength; precision-ground And case-hardened for durability
Manufactured to strict SKF quality standards for guaranteed reliable performance
Journal cross is engineered with a solid cold-formed body to ensure better wear And overall strength
Advanced manufacturing technology delivers remarkable fit and function
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing and lubrication options or industry specific solutions.
Bondhus® 13207 Ball End Straight Blade Hex Key, Ergonomic T-Handle Handle, Protanium® High Torque Steel, ProGuard™
Bondhus® 13207 Ball End Straight Blade Hex Key, Ergonomic Grip/T-Handle Handle, Protanium® High Torque Steel, ProGuard™
Klein® 76224 Hex Key, T-Handle Handle, Steel
