RBC Bearings 7/8"-ID NEEDLE BEARING INNER RACES RBC IR-7214
RBC® IR7214 Pitchlign® Heavy Duty Inner Ring, 7/8 in ID x 1-1/8 in OD, 1.01 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
-
BrandRBC®
-
UPC637400011277
-
Manufacturer Part NumberIR7214
-
CountryUSA
-
FinishChrome Plated
-
Material52100 Steel
-
TypeHeavy Duty
-
SeriesPitchlign®
-
Inside Diameter7/8 in
-
Outside Diameter1-1/8 in
-
Bore TypeRound
-
Overall Width1.01 in
-
Suitable For Use WithPrecision Ground Heavy Duty Needle Roller Bearings
- Precision ground on all surfaces
- Hardened roller contact surface eliminates the need for a hardened, precision ground shaft
-
UNSPSC31171512
-
Package Description1/PK
-
Standards/ApprovalsASPR|CAS|DFAR|FAR Standards|MS51962
-
Warranty90 Days
-
Catalog
Recently Viewed
RBC® IR7214 Pitchlign® Heavy Duty Inner Ring, 7/8 in ID x 1-1/8 in OD, 1.01 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
Dichtomatik N70354 O-Ring, 354 Dash Number, 5.1 in ID x 5.52 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
40-B-28-F1.3/16 28 Tooth Sprockets For #40 Chain-idc40b28f1.
28 TOOTH SPROCKETS FOR #40 CHAIN-IDC40B28F1.3/16 >
Morse® 131094 MHSTK Hole Saw, 9/16 in Dia, 1-15/16 in D Cutting, Carbide Cutting Edge, 1/2 to 20 Arbor
QD (quick detachable) bushings are designed for conventional mounting or reverse mounting. These bushings have a flange.
