IKO LRB121616 Inch Series Inner Ring With Oil Groove, 3/4 in ID x 1 in OD, 25.65 mm OAW, For Use With BR162416 Machined Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. Inner Rings for machined-type needle roller bearings come in a variety of dimensions. Inch-type LRB series Inner Rings offer shaft diameters from 3/8 to 3-3/4 in and oil-hole versions for easier lubrication.
-
BrandIKO
-
Manufacturer Part NumberLRB121616
-
CountryUSA
-
Lubrication Hole TypeOil
-
MaterialHigh Carbon Steel
-
Inside Diameter3/4 in
-
Bore TypeTapered
-
UNSPSC31171547
-
Catalog
Recently Viewed
IKO LRB121616 Inch Series Inner Ring With Oil Groove, 3/4 in ID x 1 in OD, 25.65 mm OAW, For Use With BR162416 Machined Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. Inner Rings for machined-type needle roller bearings come in a variety of dimensions. Inch-type LRB series Inner Rings offer shaft diameters from 3/8 to 3-3/4 in and oil-hole versions for easier lubrication.
Klein® 53725 Cable Cutter, 3/8 in Cable/Wire, 7-1/4 in OAL, For Wire THK 14 to 10 AWG
The Klein Tools BX and Armored Cable Cutter is simple to use. It easily cuts armored cable up to 3/8-Inch (9.5 mm) diameter: BX, AC, MC, MCAP and Greenfield, with a couple of turns of the handle. Swift cutting blade eliminates burrs and won't nick cable. Comes with one blade stored in handle for convenience. Up to six replacement blades can be stored in handle.
Power Team® C55C C Series General Purpose Single Acting Spring Return Hydraulic Cylinder, 5 ton Capacity, 1-1/8 in Dia Bore, 5-1/4 in L Stroke, 8-1/2 in H Retract, 1 in Dia Rod, 10061 psi
Power Team® C55C C Series General Purpose Single Acting Spring Return Hydraulic Cylinder, 5 ton Capacity, 1-1/8 in Dia Bore, 5-1/4 in L Stroke, 8-1/2 in H Retract, 1 in Dia Rod, 10061 psi
Milwaukee® M18™ FUEL™ SAWZALL® 2720-20 Adjustable Shoe Cordless Reciprocating Saw, 1-1/8 in L Stroke, 0 to 3000 spm, Straight Stroke, 18 VDC, 18-1/2 in OAL
The M18™ FUEL™ SAWZALL® reciprocating saw cuts faster than its corded counterparts and offers upto 2X more runtime and 5X longer tool life than competitive saws. The POWERSTATE™ brushless motor provides cutting power that has only been associated with corded tools. The M18™ REDLITHIUM™ XC5.0 extended capacity battery pack (not included delivers upto 2 5X runtime and provides more work per charge and more work over the life of the pack than competitive batteries the saw's REDLINK™ Plus™ intelligence ensures optimized performance and protection from overloading, overheating and over discharging. The 18 V Lithium-Ion SAWZALL® features an adjustable shoe, integrated LED light and a hang hook for convenient storage on the job.
Milwaukee® TILT-LOK 6390-21 Corded Circular Saw Kit, 7-1/4 in Dia Blade, 5/8 in Arbor/Shank, 1-13/16 in at 45 deg, 1-11/16 in at 50 deg, 2-7/16 in at 90 deg, 2-9/16 in at 90 deg Cutting, Right Blade Side
The Tilt-Lokâ„¢ handle on Milwaukee's 6390-20 is the most revolutionary concept for circular saws in years. The eight position cushioned top handle adjusts to any cutting application maximizing comfort and control. Weighing in at 10.4 Lb. and delivering 3.25 maximum horsepower, this tool offers the best power to weight ratio in the industry. The blade can bevel to 50 degrees and offers superior visibility and a clear sight line from either side. Helical steel gears and a 22 amp switch are just two of the features that ensure the Milwaukee's reputation for durability.
Milwaukee® M12™ 48-59-1201 Compact Charger and Portable Power Source, For Use With M12™ Battery, Li-Ion Battery
The M12â„¢ compact charger and power source provides convenient, on-the-go charging for all M12â„¢ batteries both on and off the jobsite. Using the included jobsite tough micro-USB cable and 2.1A wall plug, the compact charger expands the portability of all M12â„¢ products. When not near an outlet, the compact charger is compatible with any USB output, including in-vehicle USB ports. Delivering additional functionality, the M12â„¢ compact charger and power source combines with any M12â„¢ battery to provide fast, portable charging for electronic devices. It can also be used to power all models of M12â„¢ heated gear for increased functionality. Designed to maximize the versatility of the M12â„¢ system, the multi-function M12â„¢ compact charger and power source provides convenient portable charging for batteries and devices.
