FED/Bronze 5/8" X 1" X 1/2" BRONZE BUSHINGS FEB SS-20-32-8
ISOSTATIC™ Oilube® 401209 Round Bore Sleeve Bearing, 5/8 in Dia Bore, 1 in OD, 1/2 in W
-
BrandISOSTATIC™
-
UPC846802045043
-
Manufacturer Part Number401209
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width1/2 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter1 in
-
Bore Diameter5/8 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSS-2032-8
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Catalog
-
Specification Sheet
Recently Viewed
ISOSTATIC™ Oilube® 401209 Round Bore Sleeve Bearing, 5/8 in Dia Bore, 1 in OD, 1/2 in W
ISOSTATIC™ Oilube® 401127 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 5/8 in OD, 1 in W
5" X 12" X 4-1/2" CARDBOARD BIN BOX-KOL10082 >
#12 X 1" Pan Head Phillips Sheet Metal Screw
The W2508 wood attic ladder has a duty rating of 250 pounds and comes fully assembled and ready to install. Full wrap around door hinge minimizes heat loss. The quality door is ready for staining or painting. The pull string eases the opening and closing. Hinges butt metal to metal to maintain ladder rigidity. Counter-balance mechanism eliminates sag and springiness.
Shaft support blocks are used for end or intermittent support where loads are light and deflection between supports is not a problem. Unlike shaft support rails, blocks do not permit longitudinal passage of open-type Ball Bushing® bearings. Type SB shaft support blocks enable clamping of shafts and eliminate the need for bolts, to maintain shaft position. Shimming is suggested for high-precision applications to eliminate the effect of variations in surface of base or manufacturing tolerances between supports.
