Sealmaster 1-15/16"-ID 2-B SPH PILLOW BLOCKS BRW SPB-1000-NE-1-15-16
SealmasterĀ® USRB performance mounted spherical roller bearings feature black oxide treated bearing steel races with optimized bearing geometry for load capacity, misalignment and speed capabilities. The USRB is available in both setscrew locking and adapter mounting system. The felt seal with flinger provides a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in a wide variety of bore sizes, housing styles and sealing options as illustrated on the pages to follow.
-
BrandSealmasterĀ®
-
UPC662461356494
-
Manufacturer Part Number737014
-
CountryUSA
-
Load Capacity23520 lb Dynamic/29918 lb Static
-
Locking DeviceCollar Mount
-
Temperature Rating250 deg F
-
FinishUncoated
-
MaterialCast Iron
-
Maximum Speed4000 rpm
-
TypeUnitized
-
Mounting TypeTwo-Bolt Base
-
Seal TypeFelt
-
SeriesUSRB 5000
-
Base Width2-3/16 in
-
Base to Bore Centerline2-1/4 in
-
Bolt Center-to-Center Length5-15/16 to 6-9/16 in
-
Bore Diameter1-15/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height4-9/16 in
-
Overall Length8-3/8 in
-
Overall Width2-7/8 in
- Replaceable cartridge insert
- Wide outer race
- The arrangement of rolling elements and races in SealmasterĀ® mounted spherical roller bearings can accommodate +/-2 deg of misalignment
- 52100 black oxide coated steel bearing
- Powder coat epoxy 2-bolt cast iron housing
-
Alternative Part NumberUSRB5000-115
-
UNSPSC31171505
-
Package DescriptionEACH
-
Standards/ApprovalsABMA/ANSI Certified
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Sealmaster 1-15/16"-ID 2-B SPH PILLOW BLOCKS BRW SPB-1000-NE-1-15-16
SealmasterĀ® USRB performance mounted spherical roller bearings feature black oxide treated bearing steel races with optimized bearing geometry for load capacity, misalignment and speed capabilities. The USRB is available in both setscrew locking and adapter mounting system. The felt seal with flinger provides a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in a wide variety of bore sizes, housing styles and sealing options as illustrated on the pages to follow.
Link-BeltĀ® 10415869 200 Intermediate Duty Unmounted Ball Bearing Unit With Collar and Setscrews, 1-3/8 in Dia Bore, 2.8346 in OD, 1-17/32 in W, 5810 lb Dynamic/3440 lb Static Load
200 series intermediate duty ball bearing units provide a versatility of application arrangements for carrying shafts with radial or combination radial and thrust loads. They are designed for general purpose industrial machinery, conveyors, chain and belt drives, fans and blowers, power transmission and many other applications.
The McGillĀ® CAMROLĀ® full complement needle bearings feature black oxide treated bearing steel. They are available in two basic mounting styles for use in mechanical automation or linear motion applications. Our basic features each contribute to superior performance. The LUBRIDISCĀ® seal option helps prevent metal to metal contact within the bearing. It also provides a barrier for containment entry and blowout protection when relubricating. These bearings are available with several dimensional choices. The seal options and combinations provide a specific solution for each application. Within the following section you can learn more about these features and how they can be applied to your application.
Sintered steel bushing on which the center member and friction facings rides are coated with a dry film lubricant; therefore, no oil is present to contaminate friction facings and reduce torque capacity. The bushing "free floats" on the hub. MorseĀ® offers a wide selection of bushing widths in all torque limiter sizes, permitting close matching of center member and bushing width to minimize bearing pressure and promote longer bushing life.
MorseĀ® 194617 A Plate Ground Sprocket, 32 Teeth, For Use With Model 350 Torque Limiter Model, 136.65 mm OD
MorseĀ® 604102 Adjustment Nut
