Dodge® 070393 Type S2000 Pillow Block Roller Bearing Unit, 4-7/16 in Dia Bore, 13 to 14 in L Bolt Center-to-Center, 4-3/4 in Base to Bore Centerline, 16-1/2 in OAL 9.63 in OAH
Dodge® 070393 Type S2000 Pillow Block Roller Bearing Unit, 4-7/16 in Dia Bore, 13 to 14 in L Bolt Center-to-Center, 4-3/4 in Base to Bore Centerline, 16-1/2 in OAL x 9.63 in OAH
-
BrandDodge®
-
UPC782475306237
-
Manufacturer Part Number070393
-
CountryUSA
-
Load Capacity104000 lb Dynamic/132000 lb Static
-
Locking DeviceSpringlok™ Concentric Collar
-
Temperature Rating-100 to 200 deg F
-
FinishBlack Oxide
-
MaterialCast Iron
-
Maximum Speed990 rpm
-
TypeType S2000
-
Mounting TypeFour-Bolt Base
-
Seal TypeTrident™ Triple Lip
-
Base Width4-3/4 in
-
Base to Bore Centerline4-3/4 in
-
Bolt Center-to-Center Length13 to 14 in
-
Bore Diameter4-7/16 in
-
Bore TypeRound
-
Expansion TypeExpansion
-
Overall Height9.63 in
-
Overall Length16-1/2 in
-
Overall Width6.53 in
- Permits static or dynamic misalignment up to +/- 1 deg
- Flinger to shield seal and bearing from contamination/damage
- High-capacity double row spherical rollers
- Larger rollers
- More contact area
- Case-carburized inner rings resist cracking
- Factory sealed, lubed, and adjusted
- Expansion capability up to 3/8 in
| Competitor Name | Cross-Reference Number |
|---|---|
| Applied Industrial Technologies | 100940998 |
| Motion Industries | 07547576 |
-
Alternative Part Number70393|P4B-S2-407RE
-
UNSPSC31171510
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
WarrantyLimited
-
Specification Sheet
-
Line Drawing
-
Warranty Information
-
Line Drawing
Recently Viewed
Dodge® 070393 Type S2000 Pillow Block Roller Bearing Unit, 4-7/16 in Dia Bore, 13 to 14 in L Bolt Center-to-Center, 4-3/4 in Base to Bore Centerline, 16-1/2 in OAL 9.63 in OAH
Dodge® 070393 Type S2000 Pillow Block Roller Bearing Unit, 4-7/16 in Dia Bore, 13 to 14 in L Bolt Center-to-Center, 4-3/4 in Base to Bore Centerline, 16-1/2 in OAL x 9.63 in OAH
SEAL KITS-181783 HALF SEALS-IMS214>
Jones Stephens™ Plum-Tite T37003 Mechanical Test Plug, 3 in Pipe
Dichtomatik N70334 O-Ring, 334 Dash Number, 2.6 in ID x 3.02 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Weiler® 08044 Wheel Brush, 4 in Dia Brush, 1/2 in W Face, 0.014 in Dia Filament/Wire Standard/Twist Knot Filament/Wire, 3/8 to 1/2 in Arbor Hole
Weiler® 4 in standard twist knot wire Wheel Brush provides a heavy duty brushing action with some flexibility for demanding deburring cleaning and surface preparation applications on somewhat irregular surfaces. Featuring Weiler® individual knot hole construction, these radial brushes are available in heat treated steel, type 302 stainless steel and bronze wire for use in a wide variety of applications. 1/2 to 3/8 in arbor hole for use on bench/pedestal grinder, die grinder, right angle die grinder and straight grinders.
Proto® TorquePlus™ J54207 Deep Socket Set, ASME B107.5M, 12 Points, 1/2 in Drive, 15 Pieces, Included Socket Size: 10 to 24 mm
