Dodge® 041874 Type USAF Pillow Block Roller Bearing Unit, 4-7/16 in Dia Bore, 14-1/2 to 16 in L Bolt Center-to-Center, 18.38 in OAL x 11.53 in OAH
Dodge® 041874 Type USAF Pillow Block Roller Bearing Unit, 4-7/16 in Dia Bore, 14-1/2 to 16 in L Bolt Center-to-Center, 18.38 in OAL x 11.53 in OAH
-
BrandDodge®
-
UPC782475021147
-
Manufacturer Part Number041874
-
CountryUSA
-
Load Capacity170000 lb Dynamic/200000 lb Static
-
Locking DeviceAdapter Mounted
-
FinishUncoated
-
MaterialCast Iron
-
Maximum Speed1800 rpm
-
TypeType USAF
-
Mounting TypeFour-Bolt Base
-
Seal TypeTriple-Tect™
-
Bolt Center-to-Center Length14-1/2 to 16 in
-
Bore Diameter4-7/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height11.53 in
-
Overall Length18.38 in
- Cast-in dimples locate drill holes for lube fittings, vents, sensors and mounting modifications
- Housing base is threaded to accept four grade five cap bolts for added strength that match base bolts for one-wrench installation
- Standard housings have two oversized drains adaptable to circulating oil systems
- Pry slots allow easy separation of the pillow block
- Cap bolts match base bolts for one-wrench installation
- USAF housings also match standard dimensions to assure interchangeability
| Competitor Name | Cross-Reference Number |
|---|---|
| Applied Industrial Technologies | 100942237 |
| Motion Industries | 02069262 |
-
Alternative Part NumberP4B526-USAF-407TT
-
UNSPSC31171511
-
Standards/ApprovalsUL Listed
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Dodge® 041874 Type USAF Pillow Block Roller Bearing Unit, 4-7/16 in Dia Bore, 14-1/2 to 16 in L Bolt Center-to-Center, 18.38 in OAL x 11.53 in OAH
Dodge® 041874 Type USAF Pillow Block Roller Bearing Unit, 4-7/16 in Dia Bore, 14-1/2 to 16 in L Bolt Center-to-Center, 18.38 in OAL x 11.53 in OAH
Enerpac® RCH1211 Hollow Plunger Single Acting Spring Return Hydraulic Cylinder, 12 ton, 2.13 in Bore, 1.63 in L Stroke, 4-3/4 in H Retract, 1.38 in Dia Rod, 10000 psi
Enerpac® RCH1211 Hollow Plunger Single Acting Spring Return Hydraulic Cylinder, 12 ton, 2.13 in Bore, 1.63 in L Stroke, 4-3/4 in H Retract, 1.38 in Dia Rod, 10000 psi
3/8" HARDWOOD ROUND HEAD PLUG-JWH204056>
Dichtomatik N70115 O-Ring, 115 Dash Number, 0.674 in ID x 0.88 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
