Sealmaster 2-7/16"-ID 2-BOLT TRB PILLOW BLOCK SEA RPB-207-2
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
-
BrandSealmaster®
-
UPC662288480037
-
Manufacturer Part Number550217
-
CountryUSA
-
Load Capacity9030 lb Dynamic
-
Locking DeviceDouble Set Screw
-
Temperature Rating250 deg F
-
FinishUncoated
-
MaterialCast Iron
-
Maximum Speed2000 rpm
-
TypeStandard-Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypeFelt
-
SeriesRPB
-
Base Width2-3/4 in
-
Base to Bore Centerline2-3/4 in
-
Bolt Center-to-Center Length6-15/16 to 8-11/16 in
-
Bore Diameter2-7/16 in
-
Bore TypeRound/Tapered
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height5-5/8 in
-
Overall Length10-3/8 in
-
Overall Width4 in
- Heavy duty tapered roller bearings with steel cage for radial, thrust and combined loading
- Race-mounted felt-lined flinger seal
- Double-collar interlock with 120 deg spacing setscrew lock, diamond faceted setscrews
- Powder coat epoxy 2-bolt split cast iron housing
- Powder coat epoxy 2-bolt split cast iron housing
-
Alternative Part NumberRPB-207-2
-
UNSPSC31171511
-
Package DescriptionEACH
-
Standards/ApprovalsABMA Certified
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Sealmaster 2-7/16"-ID 2-BOLT TRB PILLOW BLOCK SEA RPB-207-2
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
Dodge® 069415 Imperial Pillow Block Roller Bearing Unit, 2-7/16 in Dia Bore, 6.94 to 7.31 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-1/4 in OAL 5.59 in OAH
Dodge® imperial spherical roller bearings are the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, but it reduces the fretting corrosion caused by traditional setscrews and vibration.
FYH® SBB203 17MMKG5 SBB Cylindrical Ball Bearing Insert, 17 mm Dia Bore, 1.57 in OD, 0.86 in W, 9.55 kN Dynamic/4.8 kN Static Load
FYH® SBB203 17MMKG5 SBB Cylindrical Ball Bearing Insert, 17 mm Dia Bore, 1.57 in OD, 0.86 in W, 9.55 kN Dynamic/4.8 kN Static Load
Sealmaster 2-3/16"-ID 2-BOLT TRB PILLOW BLOCK SEA RPB-203-2
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
Wilton® 10036 Round Channel Machinist Vise With Swivel Base, 12 in Jaw, Ductile Iron
Proudly made in the USA, the machinist vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the machinist round channel vise nut is anchored at the rear to provide straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly which keeps debris out and lubrication in for a lifetime of smooth operation. The machinist vise is equipped with main jaws and a machined anvil work surface.
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
