Dodge® 070282 Type S2000 Pillow Block Roller Bearing Unit, 2-7/16 in Dia Bore, 6.94 to 7.31 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-1/4 in OAL 5.59 in OAH
Dodge® 070282 Type S2000 Pillow Block Roller Bearing Unit, 2-7/16 in Dia Bore, 6.94 to 7.31 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-1/4 in OAL x 5.59 in OAH
-
BrandDodge®
-
UPC782475305896
-
Manufacturer Part Number070282
-
CountryUSA
-
Load Capacity39000 lb Dynamic/47500 lb Static
-
Locking DeviceSpringlok™ Concentric Collar
-
Temperature Rating-100 to 200 deg F
-
FinishBlack Oxide
-
MaterialCast Iron
-
Maximum Speed1740 rpm
-
TypeType S2000
-
Mounting TypeTwo-Bolt Base
-
Seal TypeTrident™ Triple Lip
-
Base Width2.81 in
-
Base to Bore Centerline2-3/4 in
-
Bolt Center-to-Center Length6.94 to 7.31 in
-
Bore Diameter2-7/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height5.59 in
-
Overall Length9-1/4 in
-
Overall Width3.2 in
- Permits static or dynamic misalignment up to +/- 1 deg
- High-capacity double row spherical rollers
- More contact area
- Case-carburized inner rings resist cracking
- Larger rollers
- Flinger to shield seal and bearing from contamination/damage
- Expansion capability up to 3/8 in
- Factory sealed, lubed, and adjusted
| Competitor Name | Cross-Reference Number |
|---|---|
| Applied Industrial Technologies | 100738641 |
| Motion Industries | 07547546 |
-
UNSPSC31171510
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
WarrantyLimited
-
Alternative Part Number70282
-
Specification Sheet
-
Line Drawing
-
Specification Sheet
-
Line Drawing
Recently Viewed
Dodge® 070282 Type S2000 Pillow Block Roller Bearing Unit, 2-7/16 in Dia Bore, 6.94 to 7.31 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-1/4 in OAL 5.59 in OAH
Dodge® 070282 Type S2000 Pillow Block Roller Bearing Unit, 2-7/16 in Dia Bore, 6.94 to 7.31 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-1/4 in OAL x 5.59 in OAH
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 50mm (2") Length, 1.6-4.7mm (1/16-3/16") Tap Size.
