Dodge® 023013 207 Type E-Xtra Pillow Block Roller Bearing Unit, 2-7/16 in Dia Bore, 8.38 to 8.63 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 10-1/2 in OAL 5-1/2 in OAH
Dodge® 023013 207 Type E-Xtra Pillow Block Roller Bearing Unit, 2-7/16 in Dia Bore, 8.38 to 8.63 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 10-1/2 in OAL x 5-1/2 in OAH
-
BrandDodge®
-
UPC782475696291
-
Manufacturer Part Number023013
-
CountryUSA
-
Load Capacity10600 lb Dynamic/54000 lb Static
-
Locking Device65 deg Set Screw
-
FinishBlack Oxide
-
MaterialCast Iron
-
Maximum Speed2420 rpm
-
TypeType E-Xtra
-
Mounting TypeTwo-Bolt Base
-
Seal TypeTrident™ Triple Lip
-
Series207
-
Base Width2.88 in
-
Base to Bore Centerline2-3/4 in
-
Bolt Center-to-Center Length8.38 to 8.63 in
-
Bore Diameter2-7/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height5-1/2 in
-
Overall Length10-1/2 in
-
Overall Width4 in
- Factory assembled, adjusted and prelubricated
- Triple rubber lip contacting seals
- Case hardened rollers and races
- Easy installation and maintenance
| Competitor Name | Cross-Reference Number |
|---|---|
| Applied Industrial Technologies | 101883922 |
| Motion Industries | 00570361 |
-
Alternative Part Number23013|P2B-E-207R
-
UNSPSC31171516
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
Line Drawing
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Dodge® 023013 207 Type E-Xtra Pillow Block Roller Bearing Unit, 2-7/16 in Dia Bore, 8.38 to 8.63 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 10-1/2 in OAL 5-1/2 in OAH
Dodge® 023013 207 Type E-Xtra Pillow Block Roller Bearing Unit, 2-7/16 in Dia Bore, 8.38 to 8.63 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 10-1/2 in OAL x 5-1/2 in OAH
The Starrett 156M Screw Pitch Gage includes locking device, 28 leaves, and 0.25-2.50mm range. 60 Deg Threads.
Drillco 200A101 Jobber Length Drill Bit, 1/64 in Drill - Fraction, 0.0156 in Drill - Decimal Inch, 118 deg Point, HSS, Oxide Treated
200/240/280 series drills are designed for general purpose drilling under a wide range of conditions. For low to medium tensile strength materials. The surface treatment prevents chip welding, improves chip flow and increases abrasion resistance.
DOUBLE SEALED BALL BEARING-GUL62012RS >
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
55-GAL MEDIUM DEGREASER-ETOSC2055GAL >
