Dodge® 069415 Imperial Pillow Block Roller Bearing Unit, 2-7/16 in Dia Bore, 6.94 to 7.31 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-1/4 in OAL 5.59 in OAH
Dodge® imperial spherical roller bearings are the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, but it reduces the fretting corrosion caused by traditional setscrews and vibration.
-
BrandDodge®
-
UPC782475307722
-
Manufacturer Part Number069415
-
CountryUSA
-
Load Capacity39000 lb Dynamic/47500 lb Static
-
Locking DeviceAdapter Mounted
-
FinishUncoated
-
MaterialCast Iron
-
Maximum Speed2400 rpm
-
TypeImperial
-
Mounting TypeTwo-Bolt Base
-
Seal TypeTrident™ Triple Lip
-
Base Width2.86 in
-
Base to Bore Centerline2-3/4 in
-
Bolt Center-to-Center Length6.94 to 7.31 in
-
Bore Diameter2-7/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height5.59 in
-
Overall Length9-1/4 in
-
Overall Width3.42 in
- Grease limiting speeds 30% higher than set screw mounts
- Seal/land on OD of inner ring maintains full contact pressure even when misaligned
- Superior holding power reduces the fretting corrosion caused by vibration
- Patented adapter mounting system
- Push pull adapter mount
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100000349 |
| Motion Industries | 02317677 |
-
Alternative Part NumberP2B-IP-207R|69415
-
UNSPSC31171511
-
Standards/ApprovalsUL Listed
-
Specification Sheet
-
Instruction/Installation Manual
-
Instruction/Installation Manual
Recently Viewed
Dodge® 069415 Imperial Pillow Block Roller Bearing Unit, 2-7/16 in Dia Bore, 6.94 to 7.31 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-1/4 in OAL 5.59 in OAH
Dodge® imperial spherical roller bearings are the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, but it reduces the fretting corrosion caused by traditional setscrews and vibration.
Sealmaster 2-7/16"-ID 2-BOLT TRB PILLOW BLOCK SEA RPB-207-2
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
CONCRETE RAKER JOINT-JWH324125 >
Moline Bearing 19341215 Type E Pillow Block Bearing, 2-15/16 in Dia Bore, 9-1/2 in L Bolt Center-to-Center, 3-1/8 in Base to Bore Centerline, 12 in OAL x 6-1/4 in OAH
Moline Bearing 19341215 Type E Pillow Block Bearing, 2-15/16 in Dia Bore, 9-1/2 in L Bolt Center-to-Center, 3-1/8 in Base to Bore Centerline, 12 in OAL x 6-1/4 in OAH
6.5" X 4" -TRIM MASONRY BRUSH-JWH772239 >
SNAPPY APPLE AIR FRESH DISPENSER REFILL-MIS21112SA >
