Dodge® 023339 203 Double Interlock Pillow Block Roller Bearing Unit, 2-3/16 in Dia Bore, 8.06 to 9.25 in L Bolt Center-to-Center, 3 in Base to Bore Centerline, 11 in OAL x 6.52 in OAH
Dodge® 023339 203 Double Interlock Pillow Block Roller Bearing Unit, 2-3/16 in Dia Bore, 8.06 to 9.25 in L Bolt Center-to-Center, 3 in Base to Bore Centerline, 11 in OAL x 6.52 in OAH
-
BrandDodge®
-
UPC782475725663
-
Manufacturer Part Number023339
-
CountryUSA
-
Load Capacity9850 lb Dynamic/48200 lb Static
-
Locking Device65 deg Set Screw
-
FinishBlack Oxide
-
MaterialCast Iron
-
Maximum Speed2730 rpm
-
TypeDouble Interlock
-
Mounting TypeTwo-Bolt Base
-
Seal TypeTrident™ Triple Lip
-
Series203
-
Base Width2.66 in
-
Base to Bore Centerline3 in
-
Bolt Center-to-Center Length8.06 to 9.25 in
-
Bore Diameter2-3/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height6.52 in
-
Overall Length11 in
-
Overall Width3-3/4 in
- Factory assembled, adjusted and prelubricated
- Case hardened rollers and races
- Easy installation and maintenance
- Triple rubber lip contacting seals
| Competitor Name | Cross-Reference Number |
|---|---|
| Applied Industrial Technologies | 100940341 |
| Motion Industries | 00574211 |
-
Alternative Part NumberP2B-DI-203R
-
UNSPSC31171516
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
WarrantyLimited
-
Warranty Information
-
Owners/User Manual
-
Line Drawing
-
Specification Sheet
-
Catalog
Recently Viewed
Dodge® 023339 203 Double Interlock Pillow Block Roller Bearing Unit, 2-3/16 in Dia Bore, 8.06 to 9.25 in L Bolt Center-to-Center, 3 in Base to Bore Centerline, 11 in OAL x 6.52 in OAH
Dodge® 023339 203 Double Interlock Pillow Block Roller Bearing Unit, 2-3/16 in Dia Bore, 8.06 to 9.25 in L Bolt Center-to-Center, 3 in Base to Bore Centerline, 11 in OAL x 6.52 in OAH
Dodge® 023349 307 Double Interlock Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 12.81 to 13.81 in L Bolt Center-to-Center, 4-1/2 in Base to Bore Centerline, 16 in OAL x 9.42 in OAH
Dodge® 023349 307 Double Interlock Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 12.81 to 13.81 in L Bolt Center-to-Center, 4-1/2 in Base to Bore Centerline, 16 in OAL x 9.42 in OAH
Dodge® 023021 307 Type E-Xtra Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 10.81 to 11.19 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 14 in OAL 7-1/2 in OAH
Dodge® 023021 307 Type E-Xtra Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 10.81 to 11.19 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 14 in OAL x 7-1/2 in OAH
P-4-B-62-0USAF-307-TT Dodge® 039417 Type USAF Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 13-1/4 to 14-1/2 in L Bolt Center-to-Center, 5-1/4 in Base to Bore Centerline, 16-1/2 in OAL x 10-1/4 in OAH
USAF housing features including solid cast feet to increase strength, large capacity oil sump with two oversized drain holes adaptable to circulating oil systems, cast in oil return slots to keep lubricants in, oil-equalization passage allowing pillow block to be drained completely from either side, offset dowels with matched numbers on cape and base to simplify correct assembly, cast-in dimples to locate drill holes for lube fittings, vents, sensors and mounting modifications, housing base threaded to accept grade 5 cap bolts for added strength and pry slots between the cap and base to allow easy separation. Utilizes E design spherical roller bearing insert for higher load carrying capacity. USAF and USDAF match industry standard SAF and SDAF mounting dimensions.
Sealmaster 1-3/4"-ID 2-BOLT TRB PILLOW BLOCKS SEA RPB-112-2
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
Link-Belt® 10438546 200 Standard Duty Unmounted Ball Bearing Unit With Collar and Setscrews, 1-3/8 in Dia Bore, 2.8346 in OD, 1-49/64 in W, 5810 lb Dynamic/3440 lb Static Load
200 series standard duty ball bearing units provide a versatility of application arrangements for carrying shafts with radial or combination radial and thrust loads. They are designed for general purpose industrial machinery, conveyors, chain and belt drives, fans and blowers, power transmission and many other applications.
