Dodge® 070280 Type S2000 Pillow Block Roller Bearing Unit, 2-3/16 in Dia Bore, 6.56 to 6.94 in L Bolt Center-to-Center, 2-1/2 in Base to Bore Centerline, 8.88 in OAL 5 in OAH
Dodge® 070280 Type S2000 Pillow Block Roller Bearing Unit, 2-3/16 in Dia Bore, 6.56 to 6.94 in L Bolt Center-to-Center, 2-1/2 in Base to Bore Centerline, 8.88 in OAL x 5 in OAH
-
BrandDodge®
-
UPC782475305889
-
Manufacturer Part Number070280
-
CountryUSA
-
Load Capacity27000 lb Dynamic/29000 lb Static
-
Locking DeviceSpringlok™ Concentric Collar
-
Temperature Rating-100 to 200 deg F
-
FinishBlack Oxide
-
MaterialCast Iron
-
Maximum Speed1950 rpm
-
TypeType S2000
-
Mounting TypeTwo-Bolt Base
-
Seal TypeTrident™ Triple Lip
-
Base Width2.63 in
-
Base to Bore Centerline2-1/2 in
-
Bolt Center-to-Center Length6.56 to 6.94 in
-
Bore Diameter2-3/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height5 in
-
Overall Length8.88 in
-
Overall Width2.94 in
- More contact area
- Expansion capability up to 3/8 in
- Larger rollers
- High-capacity double row spherical rollers
- Case-carburized inner rings resist cracking
- Factory sealed, lubed, and adjusted
- Permits static or dynamic misalignment up to +/- 1 deg
- Flinger to shield seal and bearing from contamination/damage
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100000339 |
| Motion Industries | 07547544 |
-
Alternative Part NumberP2B-S2-203R|70280
-
UNSPSC31171510
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
WarrantyLimited
-
Line Drawing
-
Specification Sheet
-
Warranty Information
-
Catalog
Recently Viewed
Dodge® 070280 Type S2000 Pillow Block Roller Bearing Unit, 2-3/16 in Dia Bore, 6.56 to 6.94 in L Bolt Center-to-Center, 2-1/2 in Base to Bore Centerline, 8.88 in OAL 5 in OAH
Dodge® 070280 Type S2000 Pillow Block Roller Bearing Unit, 2-3/16 in Dia Bore, 6.56 to 6.94 in L Bolt Center-to-Center, 2-1/2 in Base to Bore Centerline, 8.88 in OAL x 5 in OAH
SINGLE GROOVE 5" X 4.75" A-BELT ALUMINUM SHEAVE WITH 3/4" - ID-BRWAZ50X3/4 >
GRINDING POINT/WHEELS-JWH326976>
DOUBLE SEALED BALL BEARING WITH SNAP RING-NTN6307LLNR >
Milwaukee® 2855-20 M18™ FUEL™ Cordless Variable Compact Impact Wrench With Friction Ring, 1/2 in, 250 in-lb Torque, 18 V, 4.9 in OAL
The MILWAUKEE® M18 FUEL™ 1/2" Compact Impact Wrench w/ Friction Ring is the most compact in its class, delivering the most access in tight spaces, up to 250 ft-lbs of nut-busting torque, and maximum workspace visibility. The Milwaukee cordless impact wrench measures only 4.9" in length with a POWERSTATE™ Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The Milwaukee 1/2" impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge.
