Dodge® 023003 107 Type E-Xtra Pillow Block Roller Bearing Unit, 1-7/16 in Dia Bore, 5.63 to 5.88 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 7.38 in OAL x 3-3/4 in OAH
Dodge® 023003 107 Type E-Xtra Pillow Block Roller Bearing Unit, 1-7/16 in Dia Bore, 5.63 to 5.88 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 7.38 in OAL x 3-3/4 in OAH
-
BrandDodge®
-
UPC782475696031
-
Manufacturer Part Number023003
-
CountryUSA
-
Load Capacity5500 lb Dynamic/26000 lb Static
-
Locking Device65 deg Set Screw
-
FinishBlack Oxide
-
MaterialCast Iron
-
Maximum Speed3820 rpm
-
TypeType E-Xtra
-
Mounting TypeTwo-Bolt Base
-
Seal TypeTrident™ Triple Lip
-
Series107
-
Base Width2.13 in
-
Base to Bore Centerline1.88 in
-
Bolt Center-to-Center Length5.63 to 5.88 in
-
Bore Diameter1-7/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height3-3/4 in
-
Overall Length7.38 in
-
Overall Width3 in
- Factory assembled, adjusted and prelubricated
- Case hardened rollers and races
- Easy installation and maintenance
- Triple rubber lip contacting seals
| Competitor Name | Competitor Part Number |
|---|---|
| Motion Industries | 00570245 |
| Applied Industrial Technologies | 100738668 |
-
UNSPSC31171516
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
Owners/User Manual
-
Instruction/Installation Manual
-
Specification Sheet
-
Line Drawing
-
Catalog
Recently Viewed
Dodge® 023003 107 Type E-Xtra Pillow Block Roller Bearing Unit, 1-7/16 in Dia Bore, 5.63 to 5.88 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 7.38 in OAL x 3-3/4 in OAH
Dodge® 023003 107 Type E-Xtra Pillow Block Roller Bearing Unit, 1-7/16 in Dia Bore, 5.63 to 5.88 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 7.38 in OAL x 3-3/4 in OAH
LASER LITE CORDED LOW-PRESSURE POLYURETHANE FOAM EARPLUG (EA) - HOWLL30 >
Dodge® 023001 103 Type E-Xtra Pillow Block Roller Bearing Unit, 1-1/4 in Dia Bore, 4.75 to 4.81 in L Bolt Center-to-Center, 1-1/2 in Base to Bore Centerline, 6 in OAL x 3 in OAH
Dodge® 023001 103 Type E-Xtra Pillow Block Roller Bearing Unit, 1-1/4 in Dia Bore, 4.75 to 4.81 in L Bolt Center-to-Center, 1-1/2 in Base to Bore Centerline, 6 in OAL x 3 in OAH
BLACK CORD, 100% NYLON, ULTRA THIN DESIGN IS LIGHT & COMFORTABLE, IDEAL FOR USE ON MOST SPECTACLES-GSI400 >
MORSE® 59742 5970 General Purpose Premium Carbide Burr, Oval Head, 1/2 in Dia Head, 7/8 in L of Cut, 2-5/8 in OAL, Single Cut
MORSE® 59742 5970 General Purpose Premium Carbide Burr, Oval Head, 1/2 in Dia Head, 7/8 in L of Cut, 2-5/8 in OAL, Single Cut
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
